Hi Fred/All
is it possible to let me have a copy of the ARE Application?
thanks in advance
Andy
===============================================
Andy Beardmore
Cad Technician
SPS Aerostructures Ltd., UK
Machining Facility, Mansfield
Tel : +44 (0) 115 9 880500 ext 1586
Fax : +44 (0) 115 9 880501
E-Mail : [EMAIL PROTECTED]
===============================================
This message, including any attachments, contains confidential information
intended only for a specific individual and purpose. It contains information
which is private and legally protected by law. If you are not the intended
recipient, please contact the sender immediately by reply e-mail and destroy
all copies. You are hereby notified that any disclosure, copying,
distribution or use of the contents of this transmission, or the taking of
any action or reliance thereon, is strictly prohibited.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: 27 November 2002 13:27
To: [EMAIL PROTECTED]
Subject: RE: [mfg-smartcam] Add Process Step
Jeff,
You are missing the SmartCAM Localization tool Kit (SLK), which contains the
Application Resource Editor (ARE). This utility was intended to allow third
parties to translate SmartCAM into different languages. Prior to the
discontinuance of tech support for SmartCAM by SDRC, the SLK was not readily
available, even to resellers, due to the potential tech support nightmare it
could create. I attained a copy from a reseller (with SDRC's permission)
with the understanding that I would never, NEVER, EVER ask any support
questions even remotely related to the SLK. This point is now moot since EDS
(who bought SDRC) provides no technical support for any SmartCAM questions.
This utility will not enable you to "add" anything to the "Add Process Step"
or other dialogs, but it would allow you to change the existing strings
within. In your case you could change the "Op Type" of "Edge Milling" to
"Thread Milling". The ARE does this by making a modified copy of the
applications Binary Resource Configuration (BRC) file. Then using the ARE
you can replace one string with another.
I would not recommend it's use to anyone but experienced power users.
I would like to post it to the group, or perhaps on SmartCAM Mike's web
site, but I will need an OK from EDS first since it is copyrighted material.
=============================================
Fred Lauzus, CAM Programming Coordinator
High Steel Structures, Incorporated
mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
http://www.highsteel.com <http://www.highsteel.com/>
=============================================
-----Original Message-----
From: Jeff [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, November 26, 2002 11:32 PM
To: Smartcam User Group
Subject: [mfg-smartcam] Add Process Step
My question is in the Job Plan / Add Process Step / Milling Operations.
In the Operation Type and Tool Type I would like to add Thread Milling.
I've editted the m_inch.def, mautodsc.fmt, mautoid.fmt and just about every
file
I could find that pertains to the steps but it still doesn't show up when I
open SC.
Can this be done? What am I missing?
Jeff Pieper
EATON Hydraulics
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
