no, it's not!
try doing a geometry check first and see which surfaces the system
doesn't like. turn them to a different layer and try it again see if you
get the same error.
Bill Schoeppe
DIEMOLD SERVICES
www.diemoldservices.com
1149 Pomona rd. suite C
Corona Ca. 92882
1-909-898-MOLD (6653)
----- Original Message -----
From: Bill Payter <[EMAIL PROTECTED]>
To: SmartCAM Users <[EMAIL PROTECTED]>
Sent: Thursday, February 27, 2003 4:45 AM
Subject: [mfg-smartcam] 6462 INTERNAL ERROR #1
> Hi guys,
>
> Using Free-Form, trying to use PROCESS / SURFACE MACHINING / ROUGHING on
645
> surfaces, I'm getting a box pop-up that says, "6462 Internal error #1".
>
> This box can't be acknowledged, I have to 'escape' about twenty times or
> Ctrl-Alt-Del to get out. I've tried re-booting, using a different tool
etc.
> Is 645 too many surfaces?
>
> Any ideas?
>
> Regards,
>
> Bill in the UK.
>
> P.S. The customer is waiting for his programme, he really is, he's
standing
> by his machine, tools loaded, component set, ready to hit the button.
>
> ======================================================================
> To find out more about this mailing list including how to unsubscribe,
> send the message "info mfg-smartcam" to [EMAIL PROTECTED]
> ======================================================================
======================================================================
To find out more about this mailing list including how to unsubscribe,
send the message "info mfg-smartcam" to [EMAIL PROTECTED]
======================================================================
