Group, I hope one of you can help me with a problem. We are running Advanced 3-D Machining V10 on a Win98 Dell box. When we came into work today and tried to open Smartcam a Diagnostics Window pops open and the following error message appears.
UI: C:\SM9\SYSTEM\UIV3.DLL Released with version 3.05 found 3.05 PF: C:\SM9\SYSTEM\PFV2.DLL Released with version 2.03 found 2.03 LM: C:\SM9\SYSTEM\LMV3.DLL Released with version 3.00 found 3.00 PFLIO: C:\SM9\SYSTEM\PFLIOV2.DLL Released with version 2.02 found 2.02 ATOM: C:\SM9\SYSTEM\ATOMV2.DLL Released with version 2.01 found 2.01 12028: Diagnostic from PREPROC(): Failed to initialize. 12041: Fatal error in file C:\SM9\MILL\JOSDEF\MAUTOID.FMT 11502: The Job Operations Setup failed to initialize. 12028: Diagnostic from PREPROC(): Failed to initialize. After clicking on the OK button the application exits. Any ideas? The computer was left on all weekend and everybody swears they didn't touch a thing. I have ran a scan disk and defrag and there aren't any bad sectors on the hard drive. I have tried reloading Smartcam also and that didn't fix the problem either. I'm stumped! Harry Watson Superior Machining Inc. Huber Heights, Ohio 937-236-9619 ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
