Nigel, What happens if the third line is an arc move instead of G1 Y50?
Regards, Bill Payter. ----- Original Message ----- From: "Nigel Webb" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 08, 2003 9:13 AM Subject: [mfg-smartcam] Centroid tool compensation > I'm having problems making a post processor for a :- > > Centroid CNC4-B24-MD3 > > The main problem is applying tool compensation G41/G42 > Most controllers if you do the following will apply comp OK > > Example 12mm Dia tool > G0 X11 Y25 (tool moves to x11 y25) > G1 G41 X0 Y25 (tool moves to x-6 y25) > G1 Y50 (tool moves up y axis) > > > If I do the same with the Centroid > > G0 X11 Y25 (tool moves to x11 y25) > G1 G41 X0 Y25 (tool moves to x-6 y31) ***DIFFERENT*** > G1 Y50 (tool moves up y axis) > > Has anybody solved this or does anybody have a post for a Centroid CNC4? > > Nigel Webb > Industrial Plastic Fabrications Ltd > Tel 01992 893231 > www.ipfl.co.uk <http://www.ipfl.co.uk> > > > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > > > > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
