|
Don’t give up on a spun mesh, set
the start and end the angle to create the rad only, then un-join the mesh and
extend it the length needed then re-connect it. There are settings in the smf file to
convert polylines to arcs when possible, and mcl routines to do this also, but
they are both after the mesh is created. -----Original Message----- Ive been using meshing for a little
while now. I learned this in my spare time, so I probally missed some ways to
due certain things. One of the main problems I have is
with the coons mesh. after its drawn up and I go to make the machine code it
use's poly lines and my files are 1/2. I have no polylines in my drawing
and dont need them is thier a way to get it so it will use just a line and arc. I have a angle line that goes into a
.330 rad. the only thing that changes is the depth but it insist on
using a polyline. The part I am making looks like a
pen but goes down to .500 deep with angles on the sides. I want to use the g18
g19 code for the machine and the spun mesh wont work due to the angle Thank you Delw |
- Re: [mfg-smartcam] Mesh questions Joseph Geraci
- Re: [mfg-smartcam] Mesh questions delapril
- [mfg-smartcam] Mesh questions delapril
