Hello Smartcam Users, Im trying to write a post for a Cincinnati a950mc control I am programming off the centerline of the pallet and its a horizontal machine so I have three tubes 33.0" long six different surfaces I named them H1,H2,H3,H4,H5,H6. and H1,H2,H3 are at zero deg. H4,H5,H6 are at 180 deg.
This is what my post looks like: @DECLARE #IF(WKPLN=H1)<#INDXB=B0> #IF(WKPLN=H2)<#INDXB=B0> #IF(WKPLN=H3)<#INDXB=B0> #IF(WKPLN=H4)<#INDXB=B180> #IF(WKPLN=H5)<#INDXB=B180> #IF(WKPLN=H6)<#INDXB=B180> @START #EVAL(#U0=0) #IF(#U0=1)< START> % :G0 G70 G90 T#TOOL M6 (MSG,#TDESC) X#XPOS Y#YPOS #INDXB #SPEED #SPNDL T#NTOOL #WKPLN <#MOV>Z#ZPOS M8 @TOOLCHG #IF(#U0=1)< TOOLCHANGE SECTION> G0 Z20 H0 <#FXD> :G0 G70 G90 T#TOOL M6 (MSG,#TDESC) G0 Z#ZPOS X#XPOS Y#YPOS #INDXB S#SPEED #SPNDL T#NTOOL #WKPLN <#MOV>Z#ZPOS M8 How can I get my output to show B0 or B180 at these #INDXB areas. This is what I'm getting so far: % :G0 G70 G90 T270 M6 (MSG,6.000 DIA. FACE MILL) X-6.0 Y5.8 0.0 350 M3 T240 H4 Z18.0 M8 Z16.6 G1Z-16.5F7.5 Any help would be greatly appreciated.
<<attachment: winmail.dat>>
