I think this will do it
-----Original Message-----
From: Steve Nelson [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, October 21, 2003 11:45 AM
To: Smartcam
Subject: [mfg-smartcam] POST HELP?
Hello Smartcam Users,
Im trying to write a post for a Cincinnati a950mc control I am programming off the centerline of the pallet and its a horizontal machine so I have three tubes 33.0" long six different surfaces I named them H1,H2,H3,H4,H5,H6. and H1,H2,H3 are at zero deg. H4,H5,H6 are at 180 deg.
This is what my post looks like:
@DECLARE
#IF(WKPLN=H1)<#INDXB=B0>
#IF(WKPLN=H2)<#INDXB=B0>
#IF(WKPLN=H3)<#INDXB=B0>
#IF(WKPLN=H4)<#INDXB=B180>
#IF(WKPLN=H5)<#INDXB=B180>
#IF(WKPLN=H6)<#INDXB=B180>
@START
#EVAL(#U0=0)
#IF(#U0=1)< START>
%
:G0 G70 G90 T#TOOL M6
(MSG,#TDESC)
X#XPOS Y#YPOS B#INDXB #SPEED #SPNDL T#NTOOL #WKPLN
<#MOV>Z#ZPOS M8
@TOOLCHG
#IF(#U0=1)< TOOLCHANGE SECTION>
G0 Z20 H0
<#FXD>
:G0 G70 G90 T#TOOL M6
(MSG,#TDESC)
G0 Z#ZPOS
X#XPOS Y#YPOS B#INDXB S#SPEED #SPNDL T#NTOOL #WKPLN
<#MOV>Z#ZPOS M8
How can I get my output to show B0 or B180 at these #INDXB areas.
This is what I'm getting so far:
%
:G0 G70 G90 T270 M6
(MSG,6.000 DIA. FACE MILL)
X-6.0 Y5.8 0.0 350 M3 T240 H4
Z18.0 M8
Z16.6
G1Z-16.5F7.5
Any help would be greatly appreciated.
