RE: [mfg-smartcam] show cut

[Pete Ruehle]

Thanks Bill.  I copy that.  I'll try it with a new file.   Pete in the US   -----Original Message----- From: Bill Payter [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 17, 2003 3:37 PM To: Pete Ruehle; SmartCam Forum (SmartCam Forum) Subject: Re: [mfg-smartcam] show cut   Pete,   Changing something like depth of cut or finish allowance in the planner will not effect some geometry already created, so it won't look any different in Show Cut.   Regards,   Bill in the UK.   ----- Original Message ----- From: Pete Ruehle To: 'Bill Payter' ; Pete Ruehle ; SmartCam Forum (SmartCam Forum) Sent: Wednesday, December 17, 2003 8:11 PM Subject: RE: [mfg-smartcam] show cut   I'm not sure.  I just need a visual in show cut.   -----Original Message----- From: Bill Payter [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 17, 2003 3:13 PM To: Pete Ruehle; SmartCam Forum (SmartCam Forum) Subject: Re: [mfg-smartcam] show cut   Pete,   When you create a roughing tool the values you describe take effect when you use a Process-Rough tool such as pocket roughing, altering the value will not change something you've already created. Does that help?   Regards,   Bill in the UK.   ----- Original Message ----- From: Pete Ruehle To: SmartCam Forum (SmartCam Forum) Sent: Wednesday, December 17, 2003 5:36 PM Subject: [mfg-smartcam] show cut   In pmill I opened the planner from the file menu and entered a value for "finish allowance" on the operation tab in the edit process step dialog.  I'm not seeing that allowance when I do a show cut.  Is this just the way it is or am I missing something?   Pete