RE: [mfg-smartcam] .TMP FOR HORIZONTAL W/ ANGLE HEAD

[Lambert, Phillip E. (Ship Systems)]

Bob,

Here is what we use on our G&L's. Haven't perfected drilling or FXD cycles yet.

But maybe it's a start. I use it for cutting internal keyways or heli-milling holes.

 

Also I've included a G822 user defined cycle that gives the operator freedom if cutting C/bores.

Keep in mind when you call a G8_ _ cycle you must cancel with a G800.

Call line would be 

G822 W "position" Y "position" D "hole dia." C "cutter dia." S "start x position" X "finish x depth"---

    I "helix pitch desired" P "optional retract" G "2 or 3 for direction"

G800

 

***NOTE: Cycle works in X negative direction only. For X positive direction must reverse X axis via switch or (MIR X1) command.***

 

 

Thanks ,
Edgar Lambert
CNC Programmer
Northrop Grumman Ship Systems
East Bank Machine Shop               
Pascagoula, Mississippi 

 -----Original Message-----
From: Bob Manganello [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 14, 2004 12:01 PM
To: Scquestionaddress (E-mail)
Subject: [mfg-smartcam] .TMP FOR HORIZONTAL W/ ANGLE HEAD

Does anyone have a .tmp and .smf for a horizontal mill with a right angle head attachment? It's a G&L 8000 control but I'll take anything and convert it. I would rather have a starting point then try from scratch. You guys (and girls) know what I mean.

 

Thanks,

Bob Manganello

KBA North America

York Pa.

HMCWAXIS.SMF
Description: Binary data

HMCWAXIS.TMP
Description: Binary data

G822
Description: Binary data