If in the same group as Hot Work Tool Steels 200-250 Bhn. 50 fpm hss drilling 1/16 .001 ipr 1/8 .002 ipr 1/4 .003 ipr 1/2 .006 ipr 3/4 .008 ipr 1.0 .010 ipr
End Milling Peripheral .020 doc 360 fpm .001in/tooth @ 3/8 dia. .060 doc 270 fpm .0025in/tooth @ 1/2 dia. End Milling Slotting Axial doc .030 50 fpm hss Axial doc .125 45 fpm hss dia/2 40 fpm hss That's the best I can come up with Dave Wolfgang CNC Programmer/Supervisor www.hrindustries.net ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Monday, May 03, 2004 1:20 PM Subject: RE: [mfg-smartcam] machining recommendations > That's why I'm asking -- I've never even heard of this material until now. > > Here's a link I found (gives specs, but no machining data): > www.ghcook.com/2714new.htm > > > Chris > > -----Original Message----- > From: Dave Wolfgang [mailto:[EMAIL PROTECTED] > Sent: Monday, May 03, 2004 11:24 AM > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Subject: Re: [mfg-smartcam] machining recommendations > > > Need more info! > Can't find that material in my book. > > Dave Wolfgang > CNC Programmer/Supervisor > www.hrindustries.net > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, April 30, 2004 10:52 AM > Subject: [mfg-smartcam] machining recommendations > > > > Hi all, > > > > We are machining some 2714 steel; drilling, slotting, and t-slotting. It > > seems to be a somewhat tough material to machine. Can any one recommend > sfm > > and feed per tooth for hss drills, and also Ingersoll high-positive > inserted > > end mills or an equivalent? Our inserts are ticn coated. > > > > Regards, > > > > Chris Kocourek > > Tool Designer > > FLEXTRONICS CTC > > > > ====================================================================== > > To find out more about this mailing list including how to unsubscribe, > > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > > ====================================================================== > > > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
