That's why I'm asking -- I've never even heard of this material until now. Here's a link I found (gives specs, but no machining data): www.ghcook.com/2714new.htm
Chris -----Original Message----- From: Dave Wolfgang [mailto:[EMAIL PROTECTED] Sent: Monday, May 03, 2004 11:24 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: [mfg-smartcam] machining recommendations Need more info! Can't find that material in my book. Dave Wolfgang CNC Programmer/Supervisor www.hrindustries.net ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, April 30, 2004 10:52 AM Subject: [mfg-smartcam] machining recommendations > Hi all, > > We are machining some 2714 steel; drilling, slotting, and t-slotting. It > seems to be a somewhat tough material to machine. Can any one recommend sfm > and feed per tooth for hss drills, and also Ingersoll high-positive inserted > end mills or an equivalent? Our inserts are ticn coated. > > Regards, > > Chris Kocourek > Tool Designer > FLEXTRONICS CTC > > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
