The rings are the moly top ring, cast iron second. I'm not sure if they are
the "racing" rings or not. I went with them because they were in a box in the
trunk when I bought the car :-) No other reason. We'll see how it turns out.
----- Original Message -----
From: Danijel Krajisnik
To: Miata Power ; Tim South
Sent: Monday, April 14, 2008 12:11 PM
Subject: Re: NMC- ring land thickness
I believe you are correct.
Did you get Ross racing rings? i looked at those but had no feedback
on them.
What is the reason you went with them if you don't mind me asking.
Thanks
Dan
--- On Sun, 4/13/08, Tim South <[EMAIL PROTECTED]> wrote:
From: Tim South <[EMAIL PROTECTED]>
Subject: NMC- ring land thickness
To: "Miata Power" <[email protected]>
Date: Sunday, April 13, 2008, 11:34 AM
The top ring land thickness is the distance between the 1st and 2nd
rings correct? Trying to set ring end gap on the 2002 today, and this
measurement matters per the Ross instruction sheet.
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
