Hey Brad,
 
Good time for a 1.8L swap. Should be more 1.8 motors to choose from and  
newer (lower miles) as well.
 
Jim in Tucson
 
 
In a message dated 5/11/2008 3:12:50 P.M. US Mountain Standard Time,  
[EMAIL PROTECTED] writes:

Well,

I went down and looked at it this afternoon.

1.  Sometime during the night the coolant worked back into the radiator. 
The  overflow was empty and the radiator took about 3 cups of water to 
top off.  In all it means I lost about a quart of water.

2. Swapped out the  t-stat with a known good (but used and tested in 
boiling water) t-stat and  cranked the car...

3. Lots of oil smoke, still running very rough,  maybe on 3 whole 
cylinders now.

4. The coolant was rusty. Like  muddy red rusty. Like there was more iron 
than water in it rusty. So rusty  that I could barely make out any 
coolant-green in it at all. I swapped  radiators about 6 months ago and 
remember a slight rusty color, but not  this bad.

5. The coolant also seemed very frothy. Still didn't show oil  like I 
would expect (black blobs floating around), but there was something  on 
the surface that significantly increased surface tension and the  bubbles 
would not pop.

Another point of note - I replaced the  alternator and alt/ps belts about 
2 months ago. I remember having a hell  of a time getting the alternator 
belt on - it was about 1mm too short at  full stretch. Could I 
potentially have damaged the water pump in this  process?

Unfortunately I currently only have a gravel drive to work in  so I'll 
not be undertaking diagnosis myself. Fortunately my garage is at  the 
bottom of the hill, I should be able to idle it to the bottom without  
issue in the AM.

Thanks for the quick respnoses Larry and Bill.  It's nice to know some 
long time "friends" from the list are always  willing to help out! 
Ironically I was going to be giving FM a call  tomorrow morning for some 
unrelated salvage parts. I think I'll hold of on  fixing the window 
regulator for a while - nothing a stick jammed under the  window can't 
fix while it sits in the shop.

May I solicit one more  piece of advice? I realize that you guys aren't 
looking at it directly but  considering the age, history and the LWSC - 
at what "price to fix" do I  reach the threshold of going to the 
replacement motor mentioned (actually  $425 long block '93 @ 140K)? Do I 
even have the shop diagnose and pay the  labor of pulling the head? Or 
would I be better off resigning myself to  the worst and save that money 
for a full front end rebuild on the new  motor (timing, water pump, 
pulleys, et al) on the replacement  motor?

Thanks  again!

Brad

_______________________________________________
Miatapower  mailing  list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower





**************Wondering what's for Dinner Tonight? Get new twists on family 
favorites at AOL Food.      
(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to