I'm with Derf, if you have a spare head, plop that sucker on. If you are supremely cheap, just buy the head gasket and skip the timing stuff (tho in a week, when the belt will certainly fail, you will kick yourself!)
Wallyman
derf
<[EMAIL PROTECTED]>
Sent by: To
[EMAIL PROTECTED] [EMAIL PROTECTED]
apower.net cc
[email protected]
Subject
05/12/2008 12:46 PM Re: Troubleshooting help
needed - overheating, rough
running, left onside of ...
If you have a known good head in storage then get a timing belt kit
and a head gasket set and have it running by the afternoon. Pull the
head and give the block/pistons a visual check. If there is no
block/piston damage, then you are probably good to go for a while. I
don't know about putting a rebuilt head on a high mile motor, but
putting a good used head on a motor, given the lower is in decent
shape, is another thing entirely.
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
<<inline: graycol.gif>>
<<inline: pic23392.gif>>
<<inline: ecblank.gif>>
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
