Brad, that wire goes to a small sensor that points toward the side of the car, right under the CAS. It's just above the fitting that's capped off with the rubber cap pointing the same direction.
The 1.6 I'm looking at must not have that ground bracket on it. I don't see that one. You've done a good job with this! Sam On Sun, May 18, 2008 at 6:27 PM, Brad Franks <[EMAIL PROTECTED]> wrote: > So it's almost back together. Got the head on, timing belt, covers all > the way up, exhaust and I just finished up the intake. > > There is a spare wire that comes out of the harness that feeds the rear > t-stat. Black with Blue line, single blade female connector. It breaks > out of the sheath right at the CAS. I have everything else plugged in - > CAS, Rear T-stat, Coils, and Injector harness. I can't, for the life of > me figure out where this wire goes. > > And if anyone feels entertaining, can you fill me in on the puzzle that > is the ground bracket to the head right next to the CAS? No matter which > way I turn it I can't figure out how it attaches. > > Once again, thanks a million to the list! > > Back out to do the alternator, radiator and intake plumbing to button up > the project. Hopefully I can figure out this wire this evening so I can > get the car cranking tonight and hopefully off to work tomorrow. > > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower >
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
