Kandasamy, Thuwaragan wrote: > > Okay, so I got the ACT Extreme clutch in (with the help of my friend > who’s done this countless number of times) and everything is bolted > back up … however, when the car is running, I can’t put it into gear. > The clutch is all the way down to the floor, and still not enough to > engage the gear. I checked the master cylinder and there’s no leaks, > same for the slave cylinder. Also checked to make sure the slave > cylinder is on right, and pushing the fork when I depress the clutch > pedal. > This sounds painfully familiar.
With the car on jack stands, can you put it into gear with the car turned off, start it up and the wheels spin as you start it? > > I’m open to any and all suggestions … J It is possible that you put the clutch disc in backwards. Either that or you got the wrong disc for the clutch and the pressure plate fingers are hitting the center spline of the disc and it won't release completely to let you put it in gear. Broken fork and hose pilot bearing are also possibilities. Here is my thread on the same matter earlier this year: http://list.miatapower.net/lurker/thread/20071230.054732.a7f88ad0.en.html#20071230.054732.a7f88ad0 Regards, --Ashraf _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
