Used.

I do have continuity to ground (and used one of the grounds on the EUC) but
I will try a different one. Thanks!


On Mon, Jun 23, 2008 at 9:49 PM, Stephanie Turner <
[EMAIL PROTECTED]> wrote:

>  9 times out of 10, the unit is not seeing a good ground. Try a new source
> for a ground and see what happens. Is this a new or used unit?
>
>
>
> Stephanie
>
>
>
> BEGi/Bell Engineering
>
> Phone: 830-438-2890
>
> Fax: 830-438-8361
>
> www.bellengineering.net
>
>
>
> *From:* Robert McElwee [mailto:[EMAIL PROTECTED]
> *Sent:* Monday, June 23, 2008 5:26 PM
> *To:* Miata Power List
> *Subject:* Broken Bipes ACU ?
>
>
>
> I installed it in a 1.6L. The engine won't fire. I hook the CAS back up
> (pull the Bipes out of the CAS circuit) and the car starts right up. I have
> power and ground to the Bipes but the lights on the display don't do
> anything if you start the car. Anyone know for sure if it is dead? I may
> have a second unit to test in a few days to see if my wiring is correct but
> I have done this 10 times before and everything looks fine to me.
>
>
>
> --
> Robert McElwee and Blue Flash
> "The 40 MPG Miata"
> www.lightweightmiata.com/mpg
>
> Lightweight Miata Forum:
> www.lightweightmiata.com/forum
>
> The Miata Trailer Project:
> www.lightweightmiata.com/trailer
>



-- 
Robert McElwee and Blue Flash
"The 40 MPG Miata"
www.lightweightmiata.com/mpg

Lightweight Miata Forum:
www.lightweightmiata.com/forum

The Miata Trailer Project:
www.lightweightmiata.com/trailer
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to