I slapped the second Bipes in and it didn't work either. So, I took a closer look and found that the previous owner had it wired incorrectly at the plug. I guess he never used it? Actually, we had to strip the wires so no, it was a new unit. The wires had labels on them (labeled incorrectly) so you wouldn't have known unless you traced everything out. Continuity tests were of no use.
On Mon, Jun 23, 2008 at 6:26 PM, Robert McElwee <[EMAIL PROTECTED]> wrote: > I installed it in a 1.6L. The engine won't fire. I hook the CAS back up > (pull the Bipes out of the CAS circuit) and the car starts right up. I have > power and ground to the Bipes but the lights on the display don't do > anything if you start the car. Anyone know for sure if it is dead? I may > have a second unit to test in a few days to see if my wiring is correct but > I have done this 10 times before and everything looks fine to me. > > > > -- > Robert McElwee and Blue Flash > "The 40 MPG Miata" > www.lightweightmiata.com/mpg > > Lightweight Miata Forum: > www.lightweightmiata.com/forum > > The Miata Trailer Project: > www.lightweightmiata.com/trailer > -- Robert McElwee and Blue Flash "The 40 MPG Miata" www.lightweightmiata.com/mpg Lightweight Miata Forum: www.lightweightmiata.com/forum The Miata Trailer Project: www.lightweightmiata.com/trailer
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
