I used to own one. it was an M45 Coldside, NOT an MP45 coldside. Note the presence of the P. That year of supercharger ownership was the hardest year of my Miata-driving life. It was nice when it worked, but that wasn't every day. That manifold is HARD to get sealed up. It loved to develop vacuum leaks. It seemed like it would change with the weather. Not much fun constantly hunting leaks for a year. But I got really good at taking off the manifold. REALLY good at it.
Also, the idea of running your blower belt on the alternator and water pump belt.... it never gave me a feeling of security. I was constantly checking and adjusting. In a year, I think I changed belts 4 times. With the standard tensioning thing, there was just no way to get it tight. I copied and modified another guy's design using a fabricated plate and a VW timing belt tensioner. After that, the belt stayed on and didn't slip much. I was still a nervous kitten about the possibility of losing my water pump belt at any given moment. I too JB Welded the fuel rail after discovering that fuel melts teflon tape, which the instructions told me to use. Or at least the teflon that was included in the kit. After the jb weld on the fuel rail fittings, I never had a single issue with that part. What's the kit worth? If it works, it's worth a few bucks. I sold mine for $2500, I think. That was in 2006. However, you couldn't pay me to take it back. One more day of fixing leaks and worrying about water pump belts is one day too long. There's a few pix on my site and install help. http://www.revlimiter.net/mods/coldside_install.html http://www.revlimiter.net/mods/coldside_intake.html http://www.revlimiter.net/mods/coldside_idler.html Adam On Thu, Aug 7, 2008 at 2:15 PM, Danijel Krajisnik <[EMAIL PROTECTED]>wrote: > Thank you all for the clearification, thanks to you I was able to search a > little more and found some links on google. Decent set-up...only draw back, > *I still have no idea what this kit is worth*. I don't care for the bipes > or the fuel rail, I have a MS and a dual rail with 550cc injectors on > standby for my turbo build, so not worried there. > I've read a lot of stuff about belt slippage problems, and also found a > fix...maybe more involving than I am willing to get with this. > > Thanks, > > Dan Krajisnik > > --- On *Thu, 8/7/08, Chuck Wills <[EMAIL PROTECTED]>* wrote: > > From: Chuck Wills <[EMAIL PROTECTED]> > Subject: Re: Need help on Superchargers > To: [EMAIL PROTECTED] > Cc: [email protected] > Date: Thursday, August 7, 2008, 4:06 PM > > > That's the old BRP Coldside kit. That's the item that launched BRP to > begin with. > You can probably go to miata.net and search for BRP coldside. > I had one - it's a nice kit, and probably the best way to enjoy an M45 SC. > I sold mine about 18 months ago. > Install is a bitch and a half. It took easily twice as long as my turbo > install. > I don't know if there was ever a "standard" for engine management. Some > ran with no timing control... some with water injection. You need at least > an AFPR for fuel. I'm not so sure I like the 5th injector setup, since it > would be flowing fuel through the SC itself. > > Beware the fuel rail - it's not a bad piece, but they are known to leak if > you don't JB weld the fittings in. I fought that until I JB Welded the hell > out of it. And, you have to *remove the SC* to do anything with the fuel > rail or injectors. it pays to get it right the first time. > > Overall, once you get it installed, it's a nice driving setup. Very > responsive. With good tuning and engine management I had a little over > 180hp out of mine. Several guys reported numbers near that with a stock ECU > and bandaids for fuel and timing. > > -Chuck > > ------------------ > > Danijel Krajisnik wrote: > > A friend of a friend is selling a *"MP45 coldside with manifold and 5th > injector and bipes"*... > I know very very little about SC's, but that does not sound right to me. > The guy is trustworthy in my book, but I can't find any info anywhere on the > internet about an MP45 coldside. I assume this is either an ancient kit, or > it never existed and he really has an MP62 coldside kit. Which isn't that > the FFS kit? (it has no PCpro but ahs 5th injector for cooling? sounds like > FFS) > I need a little guidance from someone that would know these things, I only > know what I read this morning/afternoon on the forums and google...that's > it. > Please school me on what coldside set-ups were ever sold and what they are > worth without any management. I do not want to buy the bipes, but if I have > to how much could I sell those for? > > Fact you need to know, according to his text message to me, it is a "MP45 > coldside for the 1.8liter, comes with intake manifold, fuel rail, 5th > injector, bipes and wiring" That's all I know, I hope that is enough > information for you to help me figure out what he has. > > If I may, I assume it is a FFS coldside kit with a MP62 and he just doesn't > know it. > > Kindest regards, > > Dan Krajisnik > 94 Miata stock motor, MegaSquirt standalone, with 550cc RX7 injectors. > > > ------------------------------ > > _______________________________________________ > Miatapower mailing [EMAIL > PROTECTED]://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > > > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > >
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
