IIRC, one of the Uber owners started with an M45 coldside. And it sold
almost instantly for $1200 when he upgraded to the Uber.

Keith Tanner
Flyin' Miata
[EMAIL PROTECTED]
http://www.flyinmiata.com <http://www.flyinmiata.com/> 
1-800-FLY-MX5s (orders)
1-970-464-5600 (tech)
2008 FM Open House: August 14-17


 


________________________________

        From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Danijel
Krajisnik
        Sent: Thursday, August 07, 2008 2:56 PM
        To: [email protected]; Adam Wolf
        Subject: Re: Need help on Superchargers
        
        
Oh, I found your site on google, read through it earlier...thanks to all
for the helpful info, I think I am well of with my knowledge on this kit
no, I'll offer the guy a $1000 for it and he keeps the bupes...he is
asking $2000 for it all...I'll pass on anything above $1100-1200.

Many many thanks, you guys really schooled me quick today, never learned
so many things about a spesific item in one in such a short period of
time.
 
Best Regards,

Dan Krajisnik

--- On Thu, 8/7/08, Adam Wolf <[EMAIL PROTECTED]> wrote:


        From: Adam Wolf <[EMAIL PROTECTED]>
        Subject: Re: Need help on Superchargers
        To: [email protected]
        Date: Thursday, August 7, 2008, 4:39 PM
        
        
        I used to own one. it was an M45 Coldside, NOT an MP45 coldside.
Note the presence of the P. That year of supercharger ownership was the
hardest year of my Miata-driving life. It was nice when it worked, but
that wasn't every day. That manifold is HARD to get sealed up. It loved
to develop vacuum leaks. It seemed like it would change with the
weather. Not much fun constantly hunting leaks for a year. But I got
really good at taking off the manifold. REALLY good at it. 
        
        Also, the idea of running your blower belt on the alternator and
water pump belt.... it never gave me a feeling of security. I was
constantly checking and adjusting. In a year, I think I changed belts 4
times. With the standard tensioning thing, there was just no way to get
it tight. I copied and modified another guy's design using a fabricated
plate and a VW timing belt tensioner. After that, the belt stayed on and
didn't slip much. I was still a nervous kitten about the possibility of
losing my water pump belt at any given moment. 
        
        I too JB Welded the fuel rail after discovering that fuel melts
teflon tape, which the instructions told me to use. Or at least the
teflon that was included in the kit. After the jb weld on the fuel rail
fittings, I never had a single issue with that part. 
        
        What's the kit worth? If it works, it's worth a few bucks. I
sold mine for $2500, I think. That was in 2006. However, you couldn't
pay me to take it back. One more day of fixing leaks and worrying about
water pump belts is one day too long. 
        
        There's a few pix on my site and install help. 
        http://www.revlimiter.net/mods/coldside_install.html
        http://www.revlimiter.net/mods/coldside_intake.html
        http://www.revlimiter.net/mods/coldside_idler.html
        
        Adam
        
        
        On Thu, Aug 7, 2008 at 2:15 PM, Danijel Krajisnik
<[EMAIL PROTECTED]> wrote:
        

Thank you all for the clearification, thanks to you I was able to search
a little more and found some links on google.  Decent set-up...only draw
back, I still have no idea what this kit is worth.  I don't care for the
bipes or the fuel rail, I have a MS and a dual rail with 550cc injectors
on standby for my turbo build, so not worried there.
I've read a lot of stuff about belt slippage problems, and also found a
fix...maybe more involving than I am willing to get with this.
 
Thanks,

Dan Krajisnik

--- On Thu, 8/7/08, Chuck Wills <[EMAIL PROTECTED]> wrote:


        From: Chuck Wills <[EMAIL PROTECTED]> 

        Subject: Re: Need help on Superchargers
        To: [EMAIL PROTECTED]
        Cc: [email protected]
        
        Date: Thursday, August 7, 2008, 4:06 PM 


        That's the old BRP Coldside kit.  That's the item that launched
BRP to begin with.
        You can probably go to miata.net <http://miata.net/>  and search
for BRP coldside.
        I had one - it's a nice kit, and probably the best way to enjoy
an M45 SC.  I sold mine about 18 months ago.
        Install is a bitch and a half.  It took easily twice as long as
my turbo install.
        I don't know if there was ever a "standard" for engine
management.  Some ran with no timing control... some with water
injection.  You need at least an AFPR for fuel.  I'm not so sure I like
the 5th injector setup, since it would be flowing fuel through the SC
itself.
        
        Beware the fuel rail - it's not a bad piece, but they are known
to leak if you don't JB weld the fittings in.  I fought that until I JB
Welded the hell out of it.  And, you have to *remove the SC* to do
anything with the fuel rail or injectors.  it pays to get it right the
first time.
        
        Overall, once you get it installed, it's a nice driving setup.
Very responsive.  With good tuning and engine management I had a little
over 180hp out of mine.  Several guys reported numbers near that with a
stock ECU and bandaids for fuel and timing.
        
        -Chuck
        
        ------------------
        
        Danijel Krajisnik wrote: 

A friend of a friend is selling a "MP45 coldside with manifold and 5th
injector and bipes"...
I know very very little about SC's, but that does not sound right to me.
The guy is trustworthy in my book, but I can't find any info anywhere on
the internet about an MP45 coldside.  I assume this is either an ancient
kit, or it never existed and he really has an MP62 coldside kit.  Which
isn't that the FFS kit?  (it has no PCpro but ahs 5th injector for
cooling? sounds like FFS)
I need a little guidance from someone that would know these things, I
only know what I read this morning/afternoon on the forums and
google...that's it.
Please school me on what coldside set-ups were ever sold and what they
are worth without any management.  I do not want to buy the bipes, but
if I have to how much could I sell those for?  
 
Fact you need to know, according to his text message to me, it is a
"MP45 coldside for the 1.8liter, comes with intake manifold, fuel rail,
5th injector, bipes and wiring"  That's all I know, I hope that is
enough information for you to help me figure out what he has.
 
If I may, I assume it is a FFS coldside kit with a MP62 and he just
doesn't know it.

Kindest regards,

Dan Krajisnik
94 Miata stock motor, MegaSquirt standalone, with 550cc RX7 injectors.
 

                
________________________________


                _______________________________________________
                Miatapower mailing list
                [email protected]
        
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
                  



                _______________________________________________
                Miatapower mailing list
                [email protected]
        
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
                
                


        _______________________________________________
        Miatapower mailing list
        [email protected]
        http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower


_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to