I would leave the post. That is an odd way of doing soffits, but I
wouldn't mess with it.

You are also going to have to re-route the vent for the kitchen sink I
see going up the wall, re-position the electrical outlets and make them
GFI.

 

________________________________

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Robert McElwee
Sent: Sunday, 24 August, 2008 19:48
To: [EMAIL PROTECTED]
Cc: [email protected]
Subject: Re: NPC: Is this a load bearing wall?

 

I didn't take the best picture in the world but here is a quick webpage
I put together on the project. You may be able to understand a little
better with these pictures. I'll have to get in the attic tonight and
clean up a bit and take a look around. I've been needing to get rid of
some stuff and with a contractor coming over (we'll call a few tomorrow
to get estimates) it is something I need to do anyway.

http://www.lightweightmiata.com/kitchen/kitchen.htm

Oh, the house has not had any additions to it.




On Sun, Aug 24, 2008 at 6:22 PM, <[EMAIL PROTECTED]> wrote:

What matters is...on top of this wall in the attic does it appear to be
in the middle of the ceiling joists or are there ends of ceiling joists
resting on top of this wall. I was wondering if there had ever been an
addition onto the house, in which case this dividing wall actually does
hold up the roof to some significant degree.

 

Can you get a pic of this from above within the attic?

 

Jim in Tucson



-- 
Robert McElwee and Blue Flash
"The 50 MPG Miata"
www.lightweightmiata.com/mpg

Lightweight Miata Forum:
www.lightweightmiata.com/forum

The Miata Trailer Project:
www.lightweightmiata.com/trailer

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to