Mark, 
 
That is a hot topic (which oil to use). I've not tried any of the additives, 
but I have noticed shifter notchiness with mobil 1 for sure and MTL 
sometimes.People have suggested MTL is too light; I've switched to MT-90 and 
that has been an improvement over both. (others have switched to MTL and had it 
better...still others mix the two in various voodoo concoctions). 
 
 
*also, have you looked at the shifter itself? I don't know what year you have, 
but on the, I believe 90-97 cars, there is a plastic piece built into the ball 
of the shifter, I notice these all the time when doing a tranny service that 
some are worn and indented (hard driving or bad shifts?). I've lightly filed 
them back to smooth and had improved shifting. 
..Or if you buy a whole new shift lever, it will be one from a '99 or newer 
part (superseded) - it's all metal so no plastic to wear- this is what I've 
done on my personal miata.
...Or you can buy that little white plastic bushing and replace it, I noticed 
the part is available, have one on order to try in fact.
 
 
(also change the turret oil/lube the shifter mechanism of course)
 
 
Good luck, would love to know if you try any of the additives and they work. 
Ross Kuhns  



From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: NPC: Trans additivesDate: Mon, 25 
Aug 2008 09:21:14 -0400




All,
 
I’m getting ready to replace the tranny fluid after an engine swap and have had 
shift issues in the past w/synthetic fluids being too slippery for proper 
synchro operation. I’ve had the best luck w/ Royal Purple (tried Redline MTL & 
Mobil 1) but am considering going back to dino lube to eliminate notchy 
shifting.
 
The questions are: 
 
1)       Are there any shift modifier additives that improve synthetic 
performance? RP has an integral additive.
2)       Are the additives designed to improve LSD operation the same thing?
 
TIA,
Mark
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to