Thanks Thuwa, good info which I'll keep in mind. I have Castrol and RP on
the shelf in the garage right now and am leaning toward the Castrol. I don't
figure either of those will hurt anything and the Castrol can only be an
improvement. I'm okay with the RP but am trying to remove the last bit of
notchiness.

 

Mark

 

  _____  

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kandasamy,
Thuwaragan
Sent: Monday, August 25, 2008 10:25 AM
To: [email protected]
Subject: RE: NPC: Trans additives

 

I was having some synchro probs going into 2nd and 3rd gears even with Royal
Purple . but when I did the clutch 2 months back, I decided to try Motul
Gear 300 and now, the tranny is as smooth as it was the day I took delivery
back in '02 . I honestly thought I'm going to have to send the tranny out to
get the synchro's replaced prior to trying the Motul Gear 300 . and am still
amazed at how smooth it is.  Almost like it was just a bad dream. :-)

 

Mine is a '02 with the 6spd tranny if it makes a difference.

 

-Thuwa

 

 

  _____  

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ross Kuhns
Sent: August 25, 2008 10:11 AM
To: Mark Phillips; [email protected]
Subject: RE: NPC: Trans additives

 

Mark, 
 
That is a hot topic (which oil to use). I've not tried any of the additives,
but I have noticed shifter notchiness with mobil 1 for sure and MTL
sometimes.People have suggested MTL is too light; I've switched to MT-90 and
that has been an improvement over both. (others have switched to MTL and had
it better...still others mix the two in various voodoo concoctions). 
 
 
*also, have you looked at the shifter itself? I don't know what year you
have, but on the, I believe 90-97 cars, there is a plastic piece built into
the ball of the shifter, I notice these all the time when doing a tranny
service that some are worn and indented (hard driving or bad shifts?). I've
lightly filed them back to smooth and had improved shifting. 
..Or if you buy a whole new shift lever, it will be one from a '99 or newer
part (superseded) - it's all metal so no plastic to wear- this is what I've
done on my personal miata.
...Or you can buy that little white plastic bushing and replace it, I
noticed the part is available, have one on order to try in fact.
 
 
(also change the turret oil/lube the shifter mechanism of course)
 
 
Good luck, would love to know if you try any of the additives and they work.



Ross Kuhns  

  _____  


From: [EMAIL PROTECTED]
To: [email protected]
Subject: NPC: Trans additives
Date: Mon, 25 Aug 2008 09:21:14 -0400

All,

 

I'm getting ready to replace the tranny fluid after an engine swap and have
had shift issues in the past w/synthetic fluids being too slippery for
proper synchro operation. I've had the best luck w/ Royal Purple (tried
Redline MTL & Mobil 1) but am considering going back to dino lube to
eliminate notchy shifting.

 

The questions are: 

 

1)       Are there any shift modifier additives that improve synthetic
performance? RP has an integral additive.

2)       Are the additives designed to improve LSD operation the same thing?

 

TIA,

Mark

_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower

Reply via email to