My crate engines had Japanese markings on the crates. I was told they came from Japan.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tim South Sent: Saturday, March 28, 2009 10:40 PM To: [email protected] Subject: Re: OK, fine, let's talk v8s I've heard bad things about them (the "new" ones, not rebuilds). I also heard they were cast/assembled here in the states (Florida?). ----- Original Message ----- From: Skip Cannon <mailto:[email protected]> To: [email protected] ; [email protected] Sent: Saturday, March 28, 2009 10:23 PM Subject: RE: OK, fine, let's talk v8s I've had two Miata crate motors, both new, not the remans they sell now. Both were bad but I found the problems before I started them. One had to have a new crank, cams and bearings, The crank had metal snags sticking up from two of the main journals which had gouged grooves in the main bearings. You could see that the engine had only been rotated about 2/3 of a turn during assembly. The crank was also flattened around the oil holes indicating that there had been work done on it. The cams were rusty with pits on the lobes. The other one had rust on the cylinder walls. I talked with someone deep inside the Mazda parts system and he told me that the crate engines were assembled from reject parts from the engine assembly plant. Skip -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bill Cardell Sent: Saturday, March 28, 2009 8:04 PM To: [email protected]; [email protected] Subject: RE: OK, fine, let's talk v8s Not so sure it's true of the Miata crate motors. I spoke with someone at Laguna this weekend who sold her car after three or four crate motors failed, none lasting more than a year. This is in a street car. Bill Cardell TurboDog's Dad www.flyinmiata.com www.fmwestfield.com orders 1-800-FLY-MX5S Before you call our tech line (970.464.5600) please check out the <http://www.flyinmiata.com/FAQ/> FAQ section of our website _____ From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Saturday, March 28, 2009 7:28 PM To: [email protected] Subject: Re: OK, fine, let's talk v8s In a message dated 3/28/2009 8:16:52 P.M. Eastern Standard Time, [email protected] writes: On the crate motor: I met a guy (Keith Turk, some of you may know him) who runs at Bonneville. He ran very expensive small blocks in a 1980 Camaro. You may have seen the car in Hot Rod Mag as that is one of his sponsors. He gets surplus parts from NASCAR teams, things like radiators, etc. He had some small blocks with well over $20k invested. A while back a friend of his and fellow Bonneville guy passed away. He wanted to run the next year but didn't get to invest the time into prep like he had in previous years. So, he decided to just get a big block crate motor so he could run 200+MPH without having to spend the time and money in very high dollar small block motors. He spent a fraction of what he usually spent on motors. Well, with that crate motor he ran the fastest he had ever run. There is a lot to be said for those crate motors. I don't doubt it. When the Speed Channel or Spike motorheads are dynoing stock and crate engines, the crate performance engines put out incredible HP. The crate engines should be better engineered, as the parts have been produced by the folks who also produce the stock engines, and they have "standards" to meet/uphold. _____ A Good Credit Score is 700 or Above. See <http://pr.atwola.com/promoclk/100126575x1220439616x1201372437/aol?redir =http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%2 6hmpgID%3D62%26bcd%3DfebemailfooterNO62> yours in just 2 easy steps! _____ _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
