As a data point, I just had a cam for a Mercedes welded and ground, and the repair was $130. Doesn't make sense for a Miata, but in my case the SL guys are using up all the sedan motors, so replacing that cam would have been a $400 event.
-Zandr On 5/13/09 5:50 PM, Robert McElwee wrote: > That is true. I have heard of this fix before but have never actually > seen it in person. I'll swap it out and keep the same lifters like Keith > suggested. Thanks! > > On Wed, May 13, 2009 at 8:12 PM, Larry Alster <[email protected] > <mailto:[email protected]>> wrote: > > And if the JB Weld breaks off the cam what other damage will happen. > > Larry > > > -- > Robert McElwee and Blue Flash > "The 50 MPG Miata" > www.lightweightmiata.com/blue <http://www.lightweightmiata.com/blue> > > Lightweight Miata Forum: > www.lightweightmiata.com/forum <http://www.lightweightmiata.com/forum> > > The Miata Trailer Project: > www.lightweightmiata.com/trailer <http://www.lightweightmiata.com/trailer> > > > ------------------------------------------------------------------------ > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
