I got this once when one of the pins for the connector inside the display came loose. I had to take the display apart and re-solder the pin to the board. ~Jeff
On Sun, May 31, 2009 at 9:34 AM, Eric McCord <[email protected]>wrote: > Ok....I reseated the cable at both ends and now I get 8 black squares when > I turn on the key. > > Eric > > > On Sun, May 31, 2009 at 12:28 PM, Eric McCord <[email protected]>wrote: > >> not locally. What is odd is I never messed with the Link pad. It was >> disconnected when I parked it and it worked fine then. Also, I doubt it is >> related to my limp mode, but I have given up on knowing >> everything............the more I learn, the more I realize I don't know >> much. ;-). >> >> Eric >> >> >> On Sun, May 31, 2009 at 12:22 PM, Larry Alster <[email protected]> wrote: >> >>> Anyone you know with a Link you can borrow a cable from?? Seems to me >>> I remember people having issues with the cables. >>> >>> >>> >>> >>> >>> >>> >>> Larry >>> >>> White Knight 1991 Crystal White #99 CSP >>> Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo >>> Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger >>> Whooosh 2004 Titanium Mazdaspeed MX-5 >>> >>> LowCountry Miata http://www.lowcountrymiataclub.net >>> Masters Miata >>> RAGS 074 >>> >>> >>> >>> *From:* [email protected] [mailto: >>> [email protected]] *On Behalf Of *Eric McCord >>> *Sent:* Sunday, May 31, 2009 12:16 PM >>> *To:* Ray Ayala >>> *Cc:* [email protected] >>> *Subject:* Re: Link display issue and going into limp mode @4k rpm >>> >>> >>> >>> All the grounds are connected, no pinched wire. Still no text display on >>> the Link keypad. >>> >>> Eric >>> >>> On Sat, May 30, 2009 at 9:07 PM, Ray Ayala <[email protected]> wrote: >>> >>> Check to be sure all of the grounds got reconnected. If that's not it, >>> follow all of the wiring harnesses around the engine bay and look for >>> possible pinched wiring. >>> >>> ----- Original Message ----- >>> >>> *From:* Eric McCord <[email protected]> >>> >>> *To:* [email protected] >>> >>> *Sent:* Saturday, May 30, 2009 6:02 PM >>> >>> *Subject:* Link display issue and going into limp mode @4k rpm >>> >>> >>> >>> I just completed a headgasket change and coolant reroute. I now have no >>> display on the link pad but the buttons light up and the backlight comes on. >>> Also I hit what feels like the limp home mode but it varies between 3k and >>> 4k. I can build boost in 3rd gear up to 5psi but when I hit 4k it hits the >>> limp home mode. >>> >>> Eric >>> ------------------------------ >>> >>> _______________________________________________ >>> Miatapower mailing list >>> [email protected] >>> http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower >>> >>> >>> >> >> > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > >
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
