In my post BB meant Bill Bowser who is the creator and maker of the new style heat shield. Larry White Knight 1991 Crystal White #99 CSP Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger Whooosh 2004 Titanium Mazdaspeed MX-5 LowCountry Miata http://www.lowcountrymiataclub.net Masters Miata RAGS 074 From: [email protected] [mailto:[email protected]] On Behalf Of Eric McCord Sent: Sunday, July 12, 2009 3:59 PM To: Larry Alster Cc: Bill Cardell; Miata Power List Subject: Re: Melted master cylinder... towing My waffle is holding up fine, but I have wanted to shield the turbo better.
My issue is that I don't have a BB turbo, and I have one of my coolant lines running up and over. I don't know which of the shields will work in my application. Plus I like the new intercooler setup better, but I talk myself out of it when I start factoring in the cost............. Eric On Sun, Jul 12, 2009 at 2:27 PM, Larry Alster <[email protected]> wrote: I have 2 different versions of that old waffle heat shield in my garage. Neither ever fit on my engine?? I do have a BB heat shield, which is truly a work of art, but unfortunately the motor is sitting in the garage instead of the car. :( Larry White Knight 1991 Crystal White #99 CSP Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger Whooosh 2004 Titanium Mazdaspeed MX-5 LowCountry Miata http://www.lowcountrymiataclub.net Masters Miata RAGS 074 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bill Cardell Sent: Sunday, July 12, 2009 1:37 PM To: Bruce Labitt; [email protected] Cc: Miata Power List Subject: RE: Melted master cylinder... towing IIRC, Bruce has a fairly vintage FMII, back in the days of the waffle griddle heat shield for the turbo. Updating to the current heat shield made by Bill Bowser would prevent the problem from happening again. Bill Cardell TurboDog's Dad Flyin' Miata 1-800-359-6967 (sales) 970-464-5600 (tech support) www.flyinmiata.com www.fmwestfield.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bruce Labitt Sent: Saturday, July 11, 2009 7:45 PM To: [email protected] Cc: 'Miata Power List' Subject: Re: Melted master cylinder... towing Ian McCloghrie wrote: > On Jul 11, 2009 Bruce Labitt wrote: > >> Is the reservoir available as a separate part? I've seen rebuilds >> that come without the bottle - I just need the bottle. >> > > You don't say what year it is, but mazdacomp shows the bottle (plus > innards, cap, level sensor and mounting rubber things) available > seperately from the hydraulic bits for a 99. > > --Ian > > > Umm, sorry, its a 94. _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
