I did it with the engine out of the car. Be prepared to work for it.
The oil baffle was stuck more to the pan than the block, it got slightly warped as I pried off the pan. IIRC, to straighten it, I had to pull off the pickup tube which then required a new gasket for the pickup tube. Also, I think this is the time to install the front and rear main seals. Not required, but if you screw up the rear and pull the carrier, you will end up pulling the pan. My memory is fuzzy but it was something like this. Of course, I learned this the hard way. Luis _____ From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Sunday, October 11, 2009 11:01 AM To: [email protected] Subject: Oil Pan Gasket on 94? How much of a bitch is it to do? Never done one... Working on Casey/Flash old car and it's pissing oil like nobody's business... Thanks Wallyman This e-mail and any attachments contain URS Corporation confidential information that may be proprietary or privileged. If you receive this message in error or are not the intended recipient, you should not retain, distribute, disclose or use any of this information and you should destroy the e-mail and any attachments or copies.
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
