WG BASE is what the Link manual refers to as "the mechanical pressure".
It's configured by disabling the boost control and watching how much pressure is sustained @ WOT with just the WG spring. I went through this process which is how I arrived at 185. 185 is what WG SNS displayed in the parenthesis with BOOST TGT set to 100 (disabled) in a WOT pull through 4th gear. I don't see any mention in the manual of this value being changed automatically though, this is what concerns me. Regards, Vito Caputo On Mon, Aug 16, 2010 at 02:00:28PM -0700, nsu Tolich wrote: > Vito > That is not WG base, that is boost target > ? > WG Base will be about 34-35-36, which is the duty cycle at which is maintains > boost. > > Ivica > > --- On Mon, 8/16/10, [email protected] <[email protected]> wrote: > > > From: [email protected] <[email protected]> > Subject: Link question, WG BASE changing? > To: [email protected] > Date: Monday, August 16, 2010, 1:03 PM > > > Been upping the boost and boost control is becoming a problem, I noticed > today that WG BASE has been changing automatically on me.? Is this > expected?? I've always left it at 185 which is the apparent spring pressure > of my WG, and today it showed 193. > > Any input appreciated. > > Cheers, > Vito Caputo > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > > > > _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
