Bill, Thank you for the explanation.
While I have your attention, do you have any input on the AT-F L and H values in the version of the Link I have? The manuals I have found all refer to AT-F as a single value, mine has two. Thanks again, Vito Caputo On Mon, Aug 16, 2010 at 03:53:46PM -0600, Bill Cardell wrote: > Wg base is tied to ambient pressure measured at key on, which is why you > will see small changes. > > > Bill Cardell > TurboDog's Dad > www.flyinmiata.com > www.fmwestfield.com > Sales 1-800-359-6957 > Tech 970-464-5600 Before you call, check out > http://www.flyinmiata.com/FAQ/ > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of > [email protected] > Sent: Monday, August 16, 2010 3:14 PM > To: nsu Tolich > Cc: [email protected] > Subject: Re: Link question, WG BASE changing? > > WG BASE is what the Link manual refers to as "the mechanical pressure". > > It's configured by disabling the boost control and watching how much > pressure is sustained @ WOT with just the WG spring. I went through > this process which is how I arrived at 185. 185 is what WG SNS > displayed in the parenthesis with BOOST TGT set to 100 (disabled) in a > WOT pull through 4th gear. > > I don't see any mention in the manual of this value being changed > automatically though, this is what concerns me. > > Regards, > Vito Caputo > > > > On Mon, Aug 16, 2010 at 02:00:28PM -0700, nsu Tolich wrote: > > Vito > > That is not WG base, that is boost target ? > > WG Base will be about 34-35-36, which is the duty cycle at which is > maintains boost. > > > > Ivica > > > > --- On Mon, 8/16/10, [email protected] <[email protected]> wrote: > > > > > > From: [email protected] <[email protected]> > > Subject: Link question, WG BASE changing? > > To: [email protected] > > Date: Monday, August 16, 2010, 1:03 PM > > > > > > Been upping the boost and boost control is becoming a problem, I > > noticed today that WG BASE has been changing automatically on me.? Is > > this expected?? I've always left it at 185 which is the apparent > > spring pressure of my WG, and today it showed 193. > > > > Any input appreciated. > > > > Cheers, > > Vito Caputo > > _______________________________________________ > > Miatapower mailing list > > [email protected] > > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > > > > > > > > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
