Is it a Mk 1 Link or a Mk 2? The procedure is different. Do not cut the trace if it is a Mk 1. The narrow band O2 sensor won't be used. There are instructions on the FM site depending on the wideband you're using. Again, if you have a Mk 1 Link the wiring will be different. I can help with this when I get home and can look at how I did it, with much help from Bill Cardell.
Sam On Tue, May 3, 2011 at 12:30 PM, Stephen Rigley <[email protected]> wrote: > Hi All, > > With 90-93 link ECU's, when you install a WideBand (+ cut the trace on the > PCB), which pin does one now wire the NarrowBand signal to? > > Many thanks, > Steve > > _______________________________________________ > Miatapower mailing list > [email protected] > http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower > >
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
