On 11 Mar, 17:30, Brian Johnson <[email protected]> wrote:
> This patch makes the mt9v112 probe function use the i2c address of
> 0x48 instead of 0c5d. It also will output the the serial number that
> the sensor actually uses so you can check to see what the sensor
> actually is if this doesn't work right. It will say something like
> "Micron Sensor ID: <number>" in your dmesg log.
>
> On Wed, Mar 11, 2009 at 8:57 AM, emeliot <[email protected]> wrote:
>
> > Ok so I hope that you find a solution and every things will be work
> > fine. Thanks for your help !!
>
>
>
> 0001-set-mt9v112-probe-function-to-use-i2c-address-of-0x4.patch
> 1KZobaczPobierz
Hi
Sorry but I'm don't no linux well and I try first time use patch... I
not sure if I done it right:
I put patch in folder of microdia then run console and use commend in
that folder:
first
bash-3.2# patch -i 0001-set-mt9v112-probe-function-to-use-i2c-address-
of-0x4.patch
patching file micron.c
Hunk #1 succeeded at 441 (offset -99 lines).
Hunk #2 succeeded at 449 (offset -99 lines).
then
bash-3.2# insmod ./sn9c20x.ko
and
dmesg
sn9c20x: Unknown symbol video_ioctl2
sn9c20x: Unknown symbol video_devdata
sn9c20x: Unknown symbol video_unregister_device
sn9c20x: Unknown symbol video_device_alloc
sn9c20x: Unknown symbol video_register_device
sn9c20x: Unknown symbol video_device_release
Linux video capture interface: v2.00
sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6270 plugged-in.
sn9c20x: I2C slave 0x5d returned error during write to address 0xff
sn9c20x: I2C slave 0x5c returned error during write to address 0x01
sn9c20x: I2C slave 0x5d returned error during write to address 0xf0
sn9c20x: Unsupported sensor.
sn9c20x: probe of 4-1:1.0 failed with error -22
usbcore: registered new interface driver sn9c20x
sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded
sn9c20x: usb_sn9c20x_exit: SN9C20X USB 2.0 webcam driver unloaded
usbcore: deregistering interface driver sn9c20x
sn9c20x: SN9C20X USB 2.0 Webcam - 0C45:6270 plugged-in.
sn9c20x: I2C slave 0x5d returned error during write to address 0xff
sn9c20x: I2C slave 0x5c returned error during write to address 0x01
sn9c20x: I2C slave 0x5d returned error during write to address 0xf0
sn9c20x: Unsupported sensor.
sn9c20x: probe of 4-1:1.0 failed with error -22
usbcore: registered new interface driver sn9c20x
sn9c20x: SN9C20x USB 2.0 Webcam Driver v2009.01 loaded
Have I patch good or not and this is the reason of this dmesg ??
Mateusz
--~--~---------~--~----~------------~-------~--~----~
Lets make microdia webcams plug'n play, (currently plug'n pray)
To post to this group, send email to [email protected]
Visit us online https://groups.google.com/group/microdia
-~----------~----~----~----~------~----~------~--~---
