Are you sure you have inserted the driver module? i see no reference to it in the dmesg log. make sure you do the following from the directory in whcih you compiled the driver # insmod ./sn9c20x.ko
On Sun, Mar 29, 2009 at 2:30 PM, Wolfgang Hemmer <[email protected]> wrote: > > Brian Johnson schrieb: >> After inserting the driver module what does dmesg show? It should have >> infomration printed to it from our driver about what webcam was >> detected or any errors if it could not detect a webcam >> >> On Sun, Mar 29, 2009 at 12:48 PM, sweacher <[email protected]> wrote: >> >>> Hi Brian >>> >>> i know, but ther is no device /dev/videoN/ or such else >>> no videoN in device /dev >>> >>> sweacher >>> >>> >>> On 28 Mrz., 17:21, Brian Johnson <[email protected]> wrote: >>> >>>> You should be looking for /dev/videoN where N is some number most >>>> likely if this is your only video device it will be 0. ie /dev/video0. >>>> >>>> On Sat, Mar 28, 2009 at 9:01 AM, sweacher <[email protected]> wrote: >>>> >>>> >>>>> hi >>>>> >>>>> my cam was running fine >>>>> >>>>> but since yesterday opebsuse 11 will not find libv4l ( i think so ) >>>>> vlc-media-player send this >>>>> >>>>> Ihre Eingabe konnte nicht geöffnet werden: >>>>> VLC kann die MRL 'v4l2://' nicht öffnen. Sehen Sie für Details im >>>>> Fehlerprotokoll nach. >>>>> >>>>> Translation: >>>>> your input could not be opened >>>>> vlc could not open `v4l2:// . See details in errorprotocol >>>>> >>>>> I did reinstall libv4l -- that didnt help >>>>> >>>>> I could also not find the devise " /dev/video/ -- it was not created >>>>> why?? >>>>> >>>>> greedings sweacher >>>>> >> >> > >> >> > please look at this > i could not understand *g > > w...@linux-oq6q:~> dmesg > Linux version 2.6.25.20-0.1-default (ge...@buildhost) (gcc version 4.3.1 > 2008050 > 7 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP > 2008-12-12 > 20:30:38 +0100 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000005ff40000 (usable) > BIOS-e820: 000000005ff40000 - 000000005ff50000 (ACPI data) > BIOS-e820: 000000005ff50000 - 0000000060000000 (ACPI NVS) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > 639MB HIGHMEM available. > 896MB LOWMEM available. > Scan SMP from c0000000 for 1024 bytes. > Scan SMP from c009fc00 for 1024 bytes. > Scan SMP from c00f0000 for 65536 bytes. > found SMP MP-table at [c00ff780] 000ff780 > Entering add_active_range(0, 0, 393024) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 229376 > HighMem 229376 -> 393024 > Movable zone start PFN for each node > early_node_map[1] active PFN ranges > 0: 0 -> 393024 > On node 0 totalpages: 393024 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 1760 pages used for memmap > Normal zone: 223520 pages, LIFO batch:31 > HighMem zone: 1278 pages used for memmap > HighMem zone: 162370 pages, LIFO batch:31 > Movable zone: 0 pages used for memmap > DMI 2.3 present. > Using APIC driver default > ACPI: RSDP 000F6810, 0014 (r0 ACPIAM) > ACPI: RSDT 5FF40000, 0030 (r1 A M I OEMRSDT 4000625 MSFT 97) > ACPI: FACP 5FF40200, 0081 (r2 A M I OEMFACP 4000625 MSFT 97) > ACPI: DSDT 5FF40350, 35AC (r1 1ABVA 1ABVA003 3 INTL 2002026) > ACPI: FACS 5FF50000, 0040 > ACPI: APIC 5FF40300, 004A (r1 A M I OEMAPIC 4000625 MSFT 97) > ACPI: OEMB 5FF50040, 003F (r1 A M I OEMBIOS 4000625 MSFT 97) > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 6:6 APIC version 16 > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 70000000 (gap: 60000000:9ff80000) > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 > PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389954 > Kernel command line: > root=/dev/disk/by-id/scsi-SATA_Hitachi_HDS7216_PV7704ZDR3PS > WV-part2 splash=silent > bootsplash: silent mode. > mapped APIC to ffffb000 (fee00000) > mapped IOAPIC to ffffa000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Detected 1250.527 MHz processor. > Console: colour VGA+ 80x25 > console [tty0] enabled > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 1547748k/1572096k available (1947k kernel code, 22952k reserved, > 1630k d > ata, 256k init, 654592k highmem) > virtual kernel memory layout: > fixmap : 0xffdf2000 - 0xfffff000 (2100 kB) > pkmap : 0xff400000 - 0xff800000 (4096 kB) > vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > .init : 0xc0487000 - 0xc04c7000 ( 256 kB) > .data : 0xc02e6fbd - 0xc047e96c (1630 kB) > .text : 0xc0100000 - 0xc02e6fbd (1947 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > CPA: page pool initialized 1 of 1 pages preallocated > Calibrating delay using timer specific routine.. 2504.40 BogoMIPS > (lpj=5008815) > Security Framework initialized > AppArmor: AppArmor initialized <NULL> > AppArmor: Registered secondary security module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 512 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Compat vDSO mapped to ffffe000. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 18k freed > ACPI: Core revision 20070126 > ACPI: Checking initramfs for custom DSDT > Parsing all Control Methods: > Table [DSDT](id 0001) - 525 Objects with 53 Devices 143 Methods 27 Regions > tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired > evxfevnt-0091 [00] enable : Transition to ACPI mode > successful > CPU0: AMD Athlon(tm) XP stepping 02 > Total of 1 processors activated (2504.40 BogoMIPS). > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > Brought up 1 CPUs > CPU0 attaching sched-domain: > domain 0: span 00000001 > groups: 00000001 > net_namespace: 548 bytes > Booting paravirtualized kernel on bare hardware > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 > PCI: Using configuration type 1 > Setting up standard PCI resources > evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on > int 0x9 > evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 0 > Runtime GPEs > in this block > ACPI: EC: Look up EC in DSDT > Completing Region/Field/Buffer/Package > initialization:.......................... > ......................................................................... > Initialized 22/27 Regions 28/28 Fields 40/40 Buffers 9/12 Packages (534 > nodes) > Initializing Device/Processor/Thermal objects by executing _INI methods: > Executed 0 _INI methods requiring 0 _STA executions (examined 56 objects) > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs *10) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > PnPBIOS: Disabled by ACPI PNP > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report > AppArmor: AppArmor Filesystem Enabled > ACPI: RTC can wake from S4 > system 00:0a: ioport range 0x295-0x296 has been reserved > system 00:0a: ioport range 0x3e0-0x3e7 has been reserved > system 00:0a: ioport range 0x4d0-0x4d1 has been reserved > system 00:0a: ioport range 0x800-0x87f has been reserved > system 00:0a: ioport range 0x400-0x41f has been reserved > system 00:0b: iomem range 0xfec80000-0xfec800ff has been reserved > system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved > system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved > system 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved > system 00:0c: iomem range 0x0-0x9ffff could not be reserved > system 00:0c: iomem range 0xc0000-0xdffff could not be reserved > system 00:0c: iomem range 0xe0000-0xfffff could not be reserved > system 00:0c: iomem range 0x100000-0x5fffffff could not be reserved > system 00:0c: iomem range 0x0-0x0 could not be reserved > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: 0xfca00000-0xfeafffff > PREFETCH window: 0x00000000bff00000-0x00000000cfefffff > PCI: Setting latency timer of device 0000:00:01.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > Unpacking initramfs... done > Freeing initrd memory: 5343k freed > Machine check exception polling timer started. > audit: initializing netlink socket (disabled) > type=2000 audit(1238358317.844:1): initialized > highmem bounce pool size: 64 pages > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: VIA PCI bridge detected. Disabling DAC. > pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message > pci 0000:01:00.0: Boot video device > isapnp: Scanning for PnP cards... > Switched to high resolution mode on CPU 0 > isapnp: No Plug & Play device found > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: PC Speaker as /class/input/input0 > cpuidle: using governor ladder > cpuidle: using governor menu > NET: Registered protocol family 1 > Using IPI No-Shortcut mode > registered taskstats version 1 > Freeing unused kernel memory: 256k freed > Write protecting the kernel read-only data: 1444k > input: AT Translated Set 2 keyboard as /class/input/input1 > No dock devices found. > SCSI subsystem initialized > libata version 3.00 loaded. > pata_via 0000:00:0f.1: version 0.3.3 > ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 > scsi0 : pata_via > scsi1 : pata_via > ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 > ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 > ata1.00: ATA-7: SAMSUNG SP0842N, BH900-41, max UDMA/133 > ata1.00: 156301488 sectors, multi 16: LBA48 > ata1.01: ATA-7: Hitachi HDS721680PLAT80, P21OA8BA, max UDMA/133 > ata1.01: 156301488 sectors, multi 16: LBA48 > ata1.00: configured for UDMA/133 > ata1.01: configured for UDMA/133 > input: ImPS/2 Logitech Wheel Mouse as /class/input/input2 > ata2.00: ATAPI: HL-DT-STDVD-RAM GSA-H54N, 1.00, max UDMA/66 > ata2.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33 > ata2.00: configured for UDMA/66 > ata2.01: configured for UDMA/33 > scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0842N BH90 PQ: 0 ANSI: 5 > scsi 0:0:1:0: Direct-Access ATA Hitachi HDS72168 P21O PQ: 0 ANSI: 5 > scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H54N 1.00 PQ: 0 ANSI: 5 > scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5 > sata_via 0000:00:0f.0: version 2.3 > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 > sata_via 0000:00:0f.0: routed to hard irq line 10 > scsi2 : sata_via > scsi3 : sata_via > ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe400 bmdma 0xd800 irq 20 > ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd808 irq 20 > ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) > ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) > BIOS EDD facility v0.16 2004-Jun-25, 6 devices found > ACPI: ACPI0007:00 is registered as cooling_device0 > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO > or FUA > sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO > or FUA > sda: sda1 > sd 0:0:0:0: [sda] Attached SCSI disk > sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:1:0: [sdb] Write Protect is off > sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 > sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't > support DPO > or FUA > sd 0:0:1:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) > sd 0:0:1:0: [sdb] Write Protect is off > sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 > sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't > support DPO > or FUA > sdb: sdb1 sdb2 sdb3 > sd 0:0:1:0: [sdb] Attached SCSI disk > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:10.0: UHCI Host Controller > uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c400 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: UHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.25.20-0.1-default uhci_hcd > usb usb1: SerialNumber: 0000:00:10.0 > ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 > ehci_hcd 0000:00:10.4: EHCI Host Controller > ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:10.4: irq 21, io mem 0xfebff400 > ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 8 ports detected > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: EHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.25.20-0.1-default ehci_hcd > usb usb2: SerialNumber: 0000:00:10.4 > ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:10.1: UHCI Host Controller > uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c800 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: UHCI Host Controller > usb usb3: Manufacturer: Linux 2.6.25.20-0.1-default uhci_hcd > usb usb3: SerialNumber: 0000:00:10.1 > ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:10.2: UHCI Host Controller > uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:10.2: irq 21, io base 0x0000cc00 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > hub 2-0:1.0: over-current change on port 3 > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: UHCI Host Controller > usb usb4: Manufacturer: Linux 2.6.25.20-0.1-default uhci_hcd > usb usb4: SerialNumber: 0000:00:10.2 > ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:10.3: UHCI Host Controller > uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d000 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > hub 2-0:1.0: over-current change on port 4 > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: UHCI Host Controller > usb usb5: Manufacturer: Linux 2.6.25.20-0.1-default uhci_hcd > usb usb5: SerialNumber: 0000:00:10.3 > hub 2-0:1.0: over-current change on port 7 > hub 2-0:1.0: unable to enumerate USB device on port 7 > hub 2-0:1.0: over-current change on port 8 > kjournald starting. Commit interval 5 seconds > EXT3 FS on sdb2, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > usb 5-1: new full speed USB device using uhci_hcd and address 2 > usb 5-1: not running at top speed; connect to a high speed hub > usb 5-1: configuration #1 chosen from 1 choice > usb 5-1: New USB device found, idVendor=0c45, idProduct=627b > usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 > usb 5-1: Product: USB20 Camera > Linux agpgart interface v0.103 > agpgart: Detected VIA KT880 chipset > agpgart: AGP aperture is 64M @ 0xe0000000 > input: Power Button (FF) as /class/input/input3 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /class/input/input4 > ACPI: Power Button (CM) [PWRB] > input: Sleep Button (CM) as /class/input/input5 > ACPI: Sleep Button (CM) [SLPB] > 8139too Fast Ethernet driver 0.9.28 > ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 17 > eth0: RealTek RTL8139 at 0xf881e800, 00:0e:2e:5f:56:f7, IRQ 17 > eth0: Identified 8139 chip type 'RTL-8100B/8139D' > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sd 0:0:1:0: Attached scsi generic sg1 type 0 > scsi 1:0:0:0: Attached scsi generic sg2 type 5 > scsi 1:0:1:0: Attached scsi generic sg3 type 5 > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) > sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > sr 1:0:0:0: Attached scsi CD-ROM sr0 > sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray > sr 1:0:1:0: Attached scsi CD-ROM sr1 > ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region > SMOV [0x > 400-0x406] > ACPI: Device needs an ACPI driver > rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one year, y3k > parport_pc 00:09: reported by Plug and Play ACPI > parport0: PC-style at 0x378, irq 7 [PCSPP] > ppdev: user-space parallel port driver > Adding 2104472k swap on /dev/sdb1. Priority:-1 extents:1 across:2104472k > device-mapper: uevent: version 1.0.3 > device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: > [email protected] > loop: module loaded > kjournald starting. Commit interval 5 seconds > EXT3 FS on sdb3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > fuse init (API version 7.9) > type=1505 audit(1238351129.049:2): operation="profile_load" > name="/bin/ping" nam > e2="default" pid=1209 > type=1505 audit(1238351129.089:3): operation="profile_load" > name="/sbin/klogd" n > ame2="default" pid=1218 > type=1505 audit(1238351129.161:4): operation="profile_load" > name="/sbin/syslog-n > g" name2="default" pid=1219 > type=1505 audit(1238351129.273:5): operation="profile_load" > name="/sbin/syslogd" > name2="default" pid=1220 > type=1505 audit(1238351129.413:6): operation="profile_load" > name="/usr/sbin/avah > i-daemon" name2="default" pid=1231 > type=1505 audit(1238351129.561:7): operation="profile_load" > name="/usr/sbin/iden > td" name2="default" pid=1241 > type=1505 audit(1238351129.729:8): operation="profile_load" > name="/usr/sbin/mdns > d" name2="default" pid=1246 > type=1505 audit(1238351129.901:9): operation="profile_load" > name="/usr/sbin/name > d" name2="default" pid=1259 > type=1505 audit(1238351130.005:10): operation="profile_load" > name="/usr/sbin/nsc > d" name2="default" pid=1279 > type=1505 audit(1238351130.137:11): operation="profile_load" > name="/usr/sbin/ntp > d" name2="default" pid=1285 > powernow-k8: Processor cpuid 662 not supported > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > ip6_tables: (C) 2000-2006 Netfilter Core Team > ip_tables: (C) 2000-2006 Netfilter Core Team > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > NET: Registered protocol family 17 > eth0: no IPv6 routers present > PPP generic driver version 2.4.2 > NET: Registered protocol family 24 > ppp0 renamed to dsl0 > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > warning: `named' uses deprecated v2 capabilities in a way that may be > insecure. > w...@linux-oq6q:~> > > > sweacher > > > > --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
