Hi my Kernel is 2.6.27.21-0.1
but there is no driver for this Kernel since i installed this Kernel, cam is not running anymore the drouble is the Kernel mfg sweacher On 30 Mrz., 11:44, sweacher <[email protected]> wrote: > Hi brian > > i installed bye yast > i do not know the directory - i am just new in linux > where and how can i find the dirctory > and how to add this line?? # insmod ./sn9c20x.ko > > greedings sweacher > > On 29 Mrz., 22:05, Brian Johnson <[email protected]> wrote: > > > Are you sure you have inserted the driver module? i see no reference > > to it in the dmesg log. make sure you do the following from the > > directory in whcih you compiled the driver > > # insmod ./sn9c20x.ko > > > On Sun, Mar 29, 2009 at 2:30 PM, Wolfgang Hemmer <[email protected]> > > wrote: > > > > Brian Johnson schrieb: > > >> After inserting the driver module what does dmesg show? It should have > > >> infomration printed to it from our driver about what webcam was > > >> detected or any errors if it could not detect a webcam > > > >> On Sun, Mar 29, 2009 at 12:48 PM, sweacher <[email protected]> wrote: > > > >>> Hi Brian > > > >>> i know, but ther is no device /dev/videoN/ or such else > > >>> no videoN in device /dev > > > >>> sweacher > > > >>> On 28 Mrz., 17:21, Brian Johnson <[email protected]> wrote: > > > >>>> You should be looking for /dev/videoN where N is some number most > > >>>> likely if this is your only video device it will be 0. ie /dev/video0. > > > >>>> On Sat, Mar 28, 2009 at 9:01 AM, sweacher <[email protected]> wrote: > > > >>>>> hi > > > >>>>> my cam was running fine > > > >>>>> but since yesterday opebsuse 11 will not find libv4l ( i think so ) > > >>>>> vlc-media-player send this > > > >>>>> Ihre Eingabe konnte nicht geöffnet werden: > > >>>>> VLC kann die MRL 'v4l2://' nicht öffnen. Sehen Sie für Details im > > >>>>> Fehlerprotokoll nach. > > > >>>>> Translation: > > >>>>> your input could not be opened > > >>>>> vlc could not open `v4l2:// . See details in errorprotocol > > > >>>>> I did reinstall libv4l -- that didnt help > > > >>>>> I could also not find the devise " /dev/video/ -- it was not created > > >>>>> why?? > > > >>>>> greedings sweacher > > > > please look at this > > > i could not understand *g > > > > w...@linux-oq6q:~> dmesg > > > Linux version 2.6.25.20-0.1-default (ge...@buildhost) (gcc version 4.3.1 > > > 2008050 > > > 7 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP > > > 2008-12-12 > > > 20:30:38 +0100 > > > BIOS-provided physical RAM map: > > > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > > > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > > > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > > > BIOS-e820: 0000000000100000 - 000000005ff40000 (usable) > > > BIOS-e820: 000000005ff40000 - 000000005ff50000 (ACPI data) > > > BIOS-e820: 000000005ff50000 - 0000000060000000 (ACPI NVS) > > > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > > > 639MB HIGHMEM available. > > > 896MB LOWMEM available. > > > Scan SMP from c0000000 for 1024 bytes. > > > Scan SMP from c009fc00 for 1024 bytes. > > > Scan SMP from c00f0000 for 65536 bytes. > > > found SMP MP-table at [c00ff780] 000ff780 > > > Entering add_active_range(0, 0, 393024) 0 entries of 256 used > > > Zone PFN ranges: > > > DMA 0 -> 4096 > > > Normal 4096 -> 229376 > > > HighMem 229376 -> 393024 > > > Movable zone start PFN for each node > > > early_node_map[1] active PFN ranges > > > 0: 0 -> 393024 > > > On node 0 totalpages: 393024 > > > DMA zone: 32 pages used for memmap > > > DMA zone: 0 pages reserved > > > DMA zone: 4064 pages, LIFO batch:0 > > > Normal zone: 1760 pages used for memmap > > > Normal zone: 223520 pages, LIFO batch:31 > > > HighMem zone: 1278 pages used for memmap > > > HighMem zone: 162370 pages, LIFO batch:31 > > > Movable zone: 0 pages used for memmap > > > DMI 2.3 present. > > > Using APIC driver default > > > ACPI: RSDP 000F6810, 0014 (r0 ACPIAM) > > > ACPI: RSDT 5FF40000, 0030 (r1 A M I OEMRSDT 4000625 MSFT 97) > > > ACPI: FACP 5FF40200, 0081 (r2 A M I OEMFACP 4000625 MSFT 97) > > > ACPI: DSDT 5FF40350, 35AC (r1 1ABVA 1ABVA003 3 INTL 2002026) > > > ACPI: FACS 5FF50000, 0040 > > > ACPI: APIC 5FF40300, 004A (r1 A M I OEMAPIC 4000625 MSFT 97) > > > ACPI: OEMB 5FF50040, 003F (r1 A M I OEMBIOS 4000625 MSFT 97) > > > ACPI: PM-Timer IO Port: 0x808 > > > ACPI: Local APIC address 0xfee00000 > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > > > Processor #0 6:6 APIC version 16 > > > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > > > IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > ACPI: IRQ0 used by override. > > > ACPI: IRQ2 used by override. > > > ACPI: IRQ9 used by override. > > > Enabling APIC mode: Flat. Using 1 I/O APICs > > > Using ACPI (MADT) for SMP configuration information > > > Allocating PCI resources starting at 70000000 (gap: 60000000:9ff80000) > > > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > > > PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 > > > PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 > > > Built 1 zonelists in Zone order, mobility grouping on. Total pages: > > > 389954 > > > Kernel command line: > > > root=/dev/disk/by-id/scsi-SATA_Hitachi_HDS7216_PV7704ZDR3PS > > > WV-part2 splash=silent > > > bootsplash: silent mode. > > > mapped APIC to ffffb000 (fee00000) > > > mapped IOAPIC to ffffa000 (fec00000) > > > Enabling fast FPU save and restore... done. > > > Enabling unmasked SIMD FPU exception support... done. > > > Initializing CPU#0 > > > PID hash table entries: 4096 (order: 12, 16384 bytes) > > > Detected 1250.527 MHz processor. > > > Console: colour VGA+ 80x25 > > > console [tty0] enabled > > > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > > > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > > > Memory: 1547748k/1572096k available (1947k kernel code, 22952k reserved, > > > 1630k d > > > ata, 256k init, 654592k highmem) > > > virtual kernel memory layout: > > > fixmap : 0xffdf2000 - 0xfffff000 (2100 kB) > > > pkmap : 0xff400000 - 0xff800000 (4096 kB) > > > vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) > > > lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > > > .init : 0xc0487000 - 0xc04c7000 ( 256 kB) > > > .data : 0xc02e6fbd - 0xc047e96c (1630 kB) > > > .text : 0xc0100000 - 0xc02e6fbd (1947 kB) > > > Checking if this processor honours the WP bit even in supervisor > > > mode...Ok. > > > CPA: page pool initialized 1 of 1 pages preallocated > > > Calibrating delay using timer specific routine.. 2504.40 BogoMIPS > > > (lpj=5008815) > > > Security Framework initialized > > > AppArmor: AppArmor initialized <NULL> > > > AppArmor: Registered secondary security module capability > > > Capability LSM initialized as secondary > > > Mount-cache hash table entries: 512 > > > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > > > CPU: L2 Cache: 256K (64 bytes/line) > > > Intel machine check architecture supported. > > > Intel machine check reporting enabled on CPU#0. > > > Compat vDSO mapped to ffffe000. > > > Checking 'hlt' instruction... OK. > > > SMP alternatives: switching to UP code > > > Freeing SMP alternatives: 18k freed > > > ACPI: Core revision 20070126 > > > ACPI: Checking initramfs for custom DSDT > > > Parsing all Control Methods: > > > Table [DSDT](id 0001) - 525 Objects with 53 Devices 143 Methods 27 Regions > > > tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully > > > acquired > > > evxfevnt-0091 [00] enable : Transition to ACPI mode > > > successful > > > CPU0: AMD Athlon(tm) XP stepping 02 > > > Total of 1 processors activated (2504.40 BogoMIPS). > > > ENABLING IO-APIC IRQs > > > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > > > Brought up 1 CPUs > > > CPU0 attaching sched-domain: > > > domain 0: span 00000001 > > > groups: 00000001 > > > net_namespace: 548 bytes > > > Booting paravirtualized kernel on bare hardware > > > NET: Registered protocol family 16 > > > ACPI: bus type pci registered > > > PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 > > > PCI: Using configuration type 1 > > > Setting up standard PCI resources > > > evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on > > > int 0x9 > > > evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 5 Wake, Enabled 0 > > > Runtime GPEs > > > in this block > > > ACPI: EC: Look up EC in DSDT > > > Completing Region/Field/Buffer/Package > > > initialization:.......................... > > > ......................................................................... > > > Initialized 22/27 Regions 28/28 Fields 40/40 Buffers 9/12 Packages (534 > > > nodes) > > > Initializing Device/Processor/Thermal objects by executing _INI methods: > > > Executed 0 _INI methods requiring 0 _STA executions (examined 56 objects) > > > ACPI: Interpreter enabled > > > ACPI: (supports S0 S1 S3 S4 S5) > > > ACPI: Using IOAPIC for interrupt routing > > > ACPI: PCI Root Bridge [PCI0] (0000:00) > > > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > > > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) > > > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) > > > ACPI: PCI Interrupt Link [LNKC] (IRQs *10) > > > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > > > disabled. > > > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > > > disabled. > > > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > > > disabled. > > > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > > > disabled. > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > > > disabled. > > > Linux Plug and Play Support v0.97 (c) Adam Belay > > > pnp: PnP ACPI init > > > ACPI: bus type pnp registered > > > pnp: PnP ACPI: found 13 devices > > > ACPI: ACPI bus type pnp unregistered > > > PnPBIOS: Disabled by ACPI PNP > > > PCI: Using ACPI for IRQ routing > > > PCI: If a device > > ... > > Erfahren Sie mehr » --~--~---------~--~----~------------~-------~--~----~ Lets make microdia webcams plug'n play, (currently plug'n pray) To post to this group, send email to [email protected] Visit us online https://groups.google.com/group/microdia -~----------~----~----~----~------~----~------~--~---
