Well, that was a total stupid attack.... those values were in my
Mikrotik device profile already, but I was looking at the MIB instead of
applying the profile @_@
On 10/28/2014 10:05 AM, Eje Gustafsson wrote:
There is a OID for total memory and memory used. Would have to do a
calc operation of these two to get the available memory.
/system resource print oid
uptime: .1.3.6.1.2.1.1.3.0
total-memory: .1.3.6.1.2.1.25.2.3.1.5.65536
used-memory: .1.3.6.1.2.1.25.2.3.1.6.65536
Eje Gustafsson
WISP-Router, Inc.
*From:*[email protected]
[mailto:[email protected]] *On Behalf Of *Nick Bright
*Sent:* Tuesday, October 28, 2014 10:01 AM
*To:* [email protected]
*Subject:* Re: [Mikrotik Users] Management agents not responding
Do you know if there's an OID for available memory? The standard SNMP
Meminfo OID didn't respond, and I don't see an OID for it in the
Mikrotik MIB.
On 10/27/2014 12:26 PM, Eje Gustafsson wrote:
Seen similar behavior when your router is starting to run out of
memory and the Linux kernel is starting to shut down services on
you, or there is some other memory related issue with the board.
Might want to check your memory consumption on the router and see
if your running any layer 7 firewall rules or Web proxy which both
can suck up memory like you had unlimited amount of ram.
Eje Gustafsson
WISP-Router, Inc
Sent while on the run.
-------- Original message --------
From: Nick Bright <[email protected]>
<mailto:[email protected]>
Date:10/27/2014 12:20 PM (GMT-06:00)
To: Mikrotik Users <[email protected]>
<mailto:[email protected]>
Cc:
Subject: [Mikrotik Users] Management agents not responding
Greetings,
I have a unit which is behaving oddly. It's an RB433 running ROS 6.20.
Recently, it began behaving a bit oddly in that it will stop
responding
to management request e.g. Winbox times out, telnet and SSH
connect and
ask for a username/password, but fail after about 60 seconds of
waiting
(for locally provisioned user e.g. admin).
The unit still passes payload traffic to/from the customers, and
responds successfully to SNMP queries. If I disable the uplink
interface
facing the device, the ping watchdog will successfully trip,
reboot the
device, and it will respond to management requests again... until it
stops - 'days' later.
Any thoughts or suggestions?
--
-----------------------------------------------
- Nick Bright -
- Vice President of Technology -
- Valnet -=- We Connect You -=- -
- Tel 888-332-1616 x 315 / Fax 620-331-0789 -
- Web http://www.valnet.net/ -
-----------------------------------------------
- Are your files safe? -
- Valnet Vault - Secure Cloud Backup -
- More information & 30 day free trial at -
- http://www.valnet.net/services/valnet-vault -
-----------------------------------------------
This email message and any attachments are intended solely for the
use of the addressees hereof. This message and any attachments may
contain information that is confidential, privileged and exempt
from disclosure under applicable law. If you are not the intended
recipient of this message, you are prohibited from reading,
disclosing, reproducing, distributing, disseminating or otherwise
using this transmission. If you have received this message in
error, please promptly notify the sender by reply E-mail and
immediately delete this message from your system.
_______________________________________________
Mikrotik-users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________
Mikrotik-users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/mikrotik-users
--
-----------------------------------------------
- Nick Bright -
- Vice President of Technology -
- Valnet -=- We Connect You -=- -
- Tel 888-332-1616 x 315 / Fax 620-331-0789 -
- Webhttp://www.valnet.net/ -
-----------------------------------------------
- Are your files safe? -
- Valnet Vault - Secure Cloud Backup -
- More information & 30 day free trial at -
-http://www.valnet.net/services/valnet-vault -
-----------------------------------------------
This email message and any attachments are intended solely for the use of the addressees hereof. This message and any attachments may contain information that is confidential, privileged and exempt from disclosure under applicable law. If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission. If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
--
-----------------------------------------------
- Nick Bright -
- Vice President of Technology -
- Valnet -=- We Connect You -=- -
- Tel 888-332-1616 x 315 / Fax 620-331-0789 -
- Web http://www.valnet.net/ -
-----------------------------------------------
- Are your files safe? -
- Valnet Vault - Secure Cloud Backup -
- More information & 30 day free trial at -
- http://www.valnet.net/services/valnet-vault -
-----------------------------------------------
This email message and any attachments are intended solely for the use of the
addressees hereof. This message and any attachments may contain information
that is confidential, privileged and exempt from disclosure under applicable
law. If you are not the intended recipient of this message, you are prohibited
from reading, disclosing, reproducing, distributing, disseminating or otherwise
using this transmission. If you have received this message in error, please
promptly notify the sender by reply E-mail and immediately delete this message
from your system.
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
