I believe on the 951’s you can switch ports 1-5, then just add ether1 and wlan1 to the bridge.
Bryce D NETAGO From: [email protected] [mailto:[email protected]] On Behalf Of Scott Reed Sent: Monday, November 3, 2014 8:15 To: Mikrotik Users Subject: Re: [Mikrotik Users] Access point and switch Better way is to use the switch chip on ports 2-5 and bridge the other stuff to port 2. On 11/3/2014 9:54 AM, Jeff Harms wrote: You'll want to clear everything out by going to System>Reset Configuration and use the "no defaults configuration" the router will reboot. When it comes back up add a bridge. Add all the ports including wlan1 to that bride and add a dhcp-client to the bridge. On Mon, Nov 3, 2014 at 12:00 AM, Blair Davis <[email protected]<mailto:[email protected]>> wrote: Looking for a simple, foolproof way to setup RB-951-2n 's to act as a 5 port switch and Access Point. No routing, firewalling or filtering... Just a switch and AP These will be scattered around connected to a wired LAN. All will have the same ESSID so the clients can connect when they are near them. -- -- West Michigan Wireless ISP Allegan, Michigan 49010 269-686-8648<tel:269-686-8648> A Division of: Camp Communication Services, INC _______________________________________________ Mikrotik-users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/mikrotik-users _______________________________________________ Mikrotik-users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/mikrotik-users No virus found in this message. Checked by AVG - www.avg.com<http://www.avg.com> Version: 2015.0.5315 / Virus Database: 4189/8501 - Release Date: 11/03/14 -- Scott Reed Owner NewWays Networking, LLC Wireless Networking Network Design, Installation and Administration Mikrotik Advanced Certified www.nwwnet.net<http://www.nwwnet.net> (765) 855-1060 (765) 439-4253 Toll-free (855) 231-6239
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
