I get customers all of the time, my customer can’t get 5 meg, why not they are complaining.
You look, the client is installed at -82, getting 24 meg RX rate. 24 / 2 is 12, so sure 12 meg ok.. but wait, now they are on 10 mhz, theres 12/ 2 again, so 6 meg, so that ONE client would get 6 meg if they were the ONLY client on the access point with no interference, btw, there is another 40 clients on the AP. Guess what! Getting 2-3 meg would be doing good. Hahah. Good write up though. [DennisBurgessSignature] www.linktechs.net<http://www.linktechs.net/> – 314-735-0270 x103 – [email protected]<mailto:[email protected]> From: [email protected] [mailto:[email protected]] On Behalf Of Justin Wilson Sent: Friday, July 29, 2016 8:50 AM To: Mikrotik Users <[email protected]> Subject: Re: [Mikrotik Users] Max Subs on AP http://www.mtin.net/blog/?p=136 This applies to other vendors as well. Justin Wilson [email protected]<mailto:[email protected]> --- http://www.mtin.net Owner/CEO xISP Solutions- Consulting – Data Centers - Bandwidth http://www.midwest-ix.com COO/Chairman Internet Exchange - Peering - Distributed Fabric On Jul 8, 2016, at 3:50 PM, Scott Reed <[email protected]<mailto:[email protected]>> wrote: What would you expect to be a good maximum user count on an AP? XR5 card in a RB433AH ROS 6.28 5Ghz-A, 20MHz channel, nstreme (polling enabled, CSMA disabled), WDS mode dynamic _______________________________________________ Mikrotik-users mailing list [email protected]<mailto:[email protected]> http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
