Similar Math can applied to most standards and even non standards based
radio sets.
Then you get into how much HORSEPOWER a radio has IE CPU tiks or how
many streams it can push with out stepping on itself.
Since I solely work with Cambium on this level they have their limits as
well.
Look at an AP at 7Mhz channel then introduce interference even with
multiple streams at a 5Mbs sustainable rate for the customer I can only
place
14 customers on there and be happy and given they are all getting great
MIMO rates.
I have one that has 50 on it which is no surprise since we had to move a
ton of FSK to these newer platforms.
On 07/29/2016 09:06 AM, Dennis Burgess wrote:
I get customers all of the time, my customer can’t get 5 meg, why not
they are complaining.
You look, the client is installed at -82, getting 24 meg RX rate. 24
/ 2 is 12, so sure 12 meg ok.. but wait, now they are on 10 mhz,
theres 12/ 2 again, so 6 meg, so that ONE client would get 6 meg if
they were the ONLY client on the access point with no interference,
btw, there is another 40 clients on the AP. Guess what! Getting 2-3
meg would be doing good.
Hahah. Good write up though.
DennisBurgessSignature
www.linktechs.net <http://www.linktechs.net/> – 314-735-0270 x103 –
[email protected] <mailto:[email protected]>
*From:*[email protected]
[mailto:[email protected]] *On Behalf Of *Justin Wilson
*Sent:* Friday, July 29, 2016 8:50 AM
*To:* Mikrotik Users <[email protected]>
*Subject:* Re: [Mikrotik Users] Max Subs on AP
http://www.mtin.net/blog/?p=136
This applies to other vendors as well.
Justin Wilson
[email protected] <mailto:[email protected]>
---
http://www.mtin.net Owner/CEO
xISP Solutions- Consulting – Data Centers - Bandwidth
http://www.midwest-ix.com COO/Chairman
Internet Exchange - Peering - Distributed Fabric
On Jul 8, 2016, at 3:50 PM, Scott Reed
<[email protected] <mailto:[email protected]>>
wrote:
What would you expect to be a good maximum user count on an AP?
XR5 card in a RB433AH
ROS 6.28
5Ghz-A, 20MHz channel, nstreme (polling enabled, CSMA disabled), WDS
mode dynamic
_______________________________________________
Mikrotik-users mailing list
[email protected] <mailto:[email protected]>
http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________
Mikrotik-users mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/mikrotik-users
