Time synchronization ranks up at the top as well. Doesn't usually cause OPs error, but it is critical.

On 12/14/2016 8:51 AM, Kevin Myers via Mikrotik-users wrote:
Just wanted to echo and reinforce the comments that Justin Wilson made about 
every router that participates in OSPF needs to have the exact same version on 
it. He is 110% correct. This is not brought up a lot but is the SINGLE biggest 
factor in achieving OSPF and overall stability between the routers. I probably 
have this conversation at least once a day with a client WISP about setting a 
common version between all the OSPF routers.

The bugfix versions are good, I usually recommend 6.32.4 or 6.36.4 bugfix for 
production routers and never the latest unless there is a feature or fix you 
must have.

Thanks,
Kevin Myers
MTCINE # 1409
MTCRE,  MTCTCE, MTCWE, CCNP, MCP
Network Architect / Managing Partner
+1 (601) 287-3868 - Mobile (GMT -6)
+1 (303) 590-9943 – Office (GMT -6)
ipa.kevin.myers – Skype


#1 Ranked MikroTik consulting firm in North America
Expert consulting in | BGP | MPLS | OSPF | ISP | Data Center

IPA 2016 Conference Schedule – Come meet up with us !!

2016 FTTH Connect – Nashville, TN – June 13 - 15
WISPAPALOOZA (WISPA) USA – Las Vegas, Nevada – TBA - Fall 2016
MikroTik User Meeting (MUM) CANADA – TBA – Fall 2016



-----Original Message-----
From: mikrotik-users-boun...@wispa.org 
[mailto:mikrotik-users-boun...@wispa.org] On Behalf Of Dan Harling via 
Mikrotik-users
Sent: Wednesday, December 14, 2016 6:25 AM
To: Robbie Wright; Mikrotik Users
Subject: Re: [Mikrotik Users] OSPF errors on router

Some of our routers report this same "locally originated" OSPF message every few minutes. 
 It's nothing close to "blowing up" the logs, but troubling nonetheless.  And yes, it 
didn't start happening until we upgraded, probably to 6.36.x.  Just another data point.

Daniel Harling  <><
Engineering, Cape Ann Communications
183 Main Street, Gloucester, MA  01930
harl...@capeanncomm.com


On Wed, Dec 14, 2016 at 1:12 AM, Robbie Wright via Mikrotik-users 
<mikrotik-users@wispa.org> wrote:
Yeah, that's how we have it set. Each router has a unique router ID.
Our main router has one ID, but has a dozen or so ospf neighbors.
We've been running this setup for quite a while. Doesn't seem like we
saw it until an upgrade a while back. We do have a loop in our
network, on purpose, that OSPF routes around for primary and
redundant. However, all of the IP's that are showing in the logs
aren't part of the ring. They are all legs/stubs of the ospf, not anything to 
do with the ring.


Robbie Wright
Siuslaw Broadband
541-902-5101

On Tue, Dec 13, 2016 at 9:30 PM, Faisal Imtiaz
<fai...@snappytelecom.net>
wrote:
Each router should have a unique router ID

typically, best practice, is to take an IP Address (unique) and
assign it to the Loopback interface ( a dummy bridge interface) and
use that a router id in your OSPF instance..

irrespective of how many interfaces you have running OSPF, only one
unique router id is required.


---------
is it possible that you have created a loop where you are seeing the
packets from the router it-self ?


Regards.


Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net

________________________________

From: "Robbie Wright via Mikrotik-users" <mikrotik-users@wispa.org>
To: "Mikrotik Users" <mikrotik-users@wispa.org>
Sent: Tuesday, December 13, 2016 11:50:36 PM

Subject: Re: [Mikrotik Users] OSPF errors on router

I saw this issue pop up again. The duplicate router ID thing caught me.
We've got a main tower that has a vlan to a dozen other sites, each
running an MT with OSPF. Each vlan has a ptp ospf interface, not
broadcast, with a unique /30 public IP space. We only run one
instance of OSPF on our main tower router, with only one router ID.

I'm thinking maybe the one router ID across all the vlans is causing
the issue? Functionally, everything is working fine. But our logs are
blowing up with the "Discarding packet: locally originated" error.


Robbie Wright
Siuslaw Broadband
541-902-5101

On Thu, Sep 17, 2015 at 10:07 AM, Steve Barnes <st...@pcswin.com> wrote:
Justin I think I have followed all those steps.  I am using 6.29
exclusively.  Is there issues with that release?



Steve Barnes

General Manager

PCSWIN.COM

Howard Power Performance



From: mikrotik-users-boun...@wispa.org
[mailto:mikrotik-users-boun...@wispa.org] On Behalf Of Justin Wilson
- MTIN
Sent: Thursday, September 17, 2015 12:47 PM


To: Mikrotik Users <mikrotik-users@wispa.org>
Subject: Re: [Mikrotik Users] OSPF errors on router




Some things to make sure of before banging your head.



1.Make sure *every* router participating in OSPF is on the same OS
version.  They don’t have to be the latest greatest, just the same.
one router in a pool of 50 can taint the database.  Even if it’s one
version behind of ahead.



2.Make sure your loopback IP addresses (you are using loopbacks
correct?) are listed as the router ID.



3.If these are true point-to-point backhauls change the OSPF type to PTP.
This cuts down on the chatter on the link.  Once OSPF establishes a
session it stops talking as much as if it were in broadcast mode.



4.Double check your IPs and subnet masks.



80some% of the OSPF issues I see are a result of mismatched router
OS versions. Bringing everything to the same version solves a ton of issues.



Justin Wilson

j...@mtin.net



---
http://www.mtin.net Owner/CEO

xISP Solutions- Consulting – Data Centers - Bandwidth

http://www.midwest-ix.com  COO/Chairman

Internet Exchange - Peering - Distributed Fabric



On Sep 17, 2015, at 8:25 AM, Steve Barnes <st...@pcswin.com> wrote:



Not completely.  Not sure we don’t have a small Comm issue to a backhaul.
However the outages have gone away just get 2-3 errors a day but it
is not causing any OSPF issues or outages.  Thinking of just adding
a Filter rule to block them and go on with life.



Steve Barnes

General Manager

PCSWIN.COM

Howard Power Performance



From: mikrotik-users-boun...@wispa.org
[mailto:mikrotik-users-boun...@wispa.org]On Behalf Of Mike Hammett
Sent: Thursday, September 17, 2015 8:14 AM
To: Mikrotik Users <mikrotik-users@wispa.org>
Subject: Re: [Mikrotik Users] OSPF errors on router



Did you figure this out?



-----
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com



________________________________

From: "Steve Barnes" <st...@pcswin.com>
To: "Mikrotik Users (mikrotik-users@wispa.org)"
<mikrotik-users@wispa.org>
Sent: Thursday, September 3, 2015 11:57:17 AM
Subject: [Mikrotik Users] OSPF errors on router

I am getting the attached errors in my event log on one tower.  No
ports are flapping on the backhaul.  Both Mikrotiks are on 6.29.
Both routers CPU is <10%.  As soon as this error passes they will
work 100% for hours, even days.  I am confused and lost.  PTP
conection was Broadcast and have changed to point to point.  What to look at?



<image001.jpg>





Steve Barnes

General Manager

PCSWIN.COM

Howard Power Performance




_______________________________________________
Mikrotik-users mailing list
Mikrotik-users@wispa.org
http://lists.wispa.org/mailman/listinfo/mikrotik-users



_______________________________________________
Mikrotik-users mailing list
Mikrotik-users@wispa.org
http://lists.wispa.org/mailman/listinfo/mikrotik-users




_______________________________________________
Mikrotik-users mailing list
Mikrotik-users@wispa.org
http://lists.wispa.org/mailman/listinfo/mikrotik-users


_______________________________________________
Mikrotik-users mailing list
Mikrotik-users@wispa.org
http://lists.wispa.org/mailman/listinfo/mikrotik-users


_______________________________________________
Mikrotik-users mailing list
Mikrotik-users@wispa.org
http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________
Mikrotik-users mailing list
Mikrotik-users@wispa.org
http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________
Mikrotik-users mailing list
Mikrotik-users@wispa.org
http://lists.wispa.org/mailman/listinfo/mikrotik-users

_______________________________________________
Mikrotik-users mailing list
Mikrotik-users@wispa.org
http://lists.wispa.org/mailman/listinfo/mikrotik-users

Reply via email to