Note I most cases, they don’t’ modify them, so get their upstream communities 
and see if it affects traffic.  I.e. they may pass through to their upstream 
without issues.



Dennis Burgess – Network Solution Engineer – Consultant
MikroTik Certified 
Trainer/Consultant<http://www.linktechs.net/productcart/pc/viewcontent.asp?idpage=5>
 – MTCNA, MTCRE, MTCWE, MTCTCE, MTCINE

For Wireless Hardware/Routers visit www.linktechs.net<http://www.linktechs.net/>
Radio Frequency Coverages: www.towercoverage.com<http://www.towercoverage.com/>
Office: 314-735-0270
E-Mail: dmburg...@linktechs.net<mailto:dmburg...@linktechs.net>

From: mikrotik-users-boun...@wispa.org 
[mailto:mikrotik-users-boun...@wispa.org] On Behalf Of Faisal Imtiaz via 
Mikrotik-users
Sent: Thursday, April 13, 2017 4:14 PM
To: Nick Bright <nick.bri...@valnet.net>; Mikrotik Users 
<mikrotik-users@wispa.org>
Subject: Re: [Mikrotik Users] Multi-hop BGP

If you want to get into more details off list that will be fine...

BGP-Communities is not some magical thing, it is a Custom Defined 
feature/functionality that a provider can choose to implement or not to.. it 
only helps in doing traffic management automatically by their down stream 
customers..

There are a number of providers who don't have BGP Communities implemented for 
their down-stream customer use, however they may be willing to do some specific 
traffic engineering that one may desire ..

Otherwise, it is what it is.

:)

Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: 
supp...@snappytelecom.net<mailto:supp...@snappytelecom.net>

________________________________
From: "Nick Bright via Mikrotik-users" 
<mikrotik-users@wispa.org<mailto:mikrotik-users@wispa.org>>
To: "Mikrotik Users" <mikrotik-users@wispa.org<mailto:mikrotik-users@wispa.org>>
Sent: Thursday, April 13, 2017 2:28:09 PM
Subject: Re: [Mikrotik Users] Multi-hop BGP
On 4/10/2017 1:15 PM, Faisal Imtiaz wrote:
hint... not sure who are your ISP's but in some cases, you can use bgp 
communities for their upstream (as long as they do not filter or overwrite the 
communities) to have the desired affect.
Unfortunately that isn't an option, because of the topology. The issue is that 
a significant amount of the traffic comes from a source directly connected to 
an intermediary network, before it reaches Tier 1 Internet; and that 
intermediary network is the one that is declining to offer support for BGP 
communities.

It's the same reason that path pre-pending isn't working well either.

--

-----------------------------------------------

-  Nick Bright                                -

-  Vice President of Technology               -

-  Valnet -=- We Connect You -=-              -

-  Tel 888-332-1616 x 315 / Fax 620-331-0789  -

-  Web http://www.valnet.net/                 -

-----------------------------------------------

- Are your files safe?                        -

- Valnet Vault - Secure Cloud Backup          -

- More information & 30 day free trial at     -

- http://www.valnet.net/services/valnet-vault -

-----------------------------------------------



This email message and any attachments are intended solely for the use of the 
addressees hereof. This message and any attachments may contain information 
that is confidential, privileged and exempt from disclosure under applicable 
law. If you are not the intended recipient of this message, you are prohibited 
from reading, disclosing, reproducing, distributing, disseminating or otherwise 
using this transmission. If you have received this message in error, please 
promptly notify the sender by reply E-mail and immediately delete this message 
from your system.

_______________________________________________
Mikrotik-users mailing list
Mikrotik-users@wispa.org<mailto:Mikrotik-users@wispa.org>
http://lists.wispa.org/mailman/listinfo/mikrotik-users
_______________________________________________
Mikrotik-users mailing list
Mikrotik-users@wispa.org
http://lists.wispa.org/mailman/listinfo/mikrotik-users

Reply via email to