Do you have consistent wind? Could you add a turbine to supplement? On Tue, Jan 2, 2018 at 3:50 PM, Brian - Winters Broadband via Mikrotik-users <[email protected]> wrote:
> Not a good idea. If you run your batteries down to 9V, their storage > capacity will be significantly reduced. > > > > In addition as the voltage decreases the current increases in order to > provide the same amount of power. Add to that the voltage loss due to > resistance in the CAT5 cable feeding the router and you are not in a good > situation. > > > > Brian Horn > > Winters Broadband LLC > > > > *From:* [email protected] [mailto:mikrotik-users- > [email protected]] *On Behalf Of *Paul Tackett via Mikrotik-users > *Sent:* Tuesday, January 02, 2018 1:06 PM > *To:* 'Josh Luthman' <[email protected]>; 'Mikrotik Users' < > [email protected]> > > *Subject:* Re: [Mikrotik Users] Powerbox staggering power on ports > > > > How about wire direct to your batteries? The devices will prolly run at > 18v or less, although the batteries will take it in the shorts. But you > said this was a short term fix… > > > > *Paul Tackett, COO* > > 406-284-3174x105 <(406)%20284-3174> > > [email protected] > > --------------------------- > > [image: LAT-Web-Logo-Small] > > > > *From:* [email protected] [mailto:mikrotik-users- > [email protected] <[email protected]>] *On Behalf Of *Josh > Luthman via Mikrotik-users > *Sent:* Tuesday, January 2, 2018 13:46 > *To:* Edward H. Winters <[email protected]>; Mikrotik Users < > [email protected]> > *Subject:* Re: [Mikrotik Users] Powerbox staggering power on ports > > > > Not an option, I don't believe. It's a Tycon all in one (solar charger, > 12vdc to 24vdc) > > > > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Tue, Jan 2, 2018 at 3:43 PM, Edward H. Winters via Mikrotik-users < > [email protected]> wrote: > > just increase the reconnect voltage on your LVD? give the batteries a > little time to get a charge. > > On 01/02/2018 12:20 PM, Josh Luthman via Mikrotik-users wrote: > > Would this be relevant in my case? The devices aren't booting (just > > being clear here since you said rebooting). > > > > > > Josh Luthman > > Office: 937-552-2340 > > Direct: 937-552-2343 > > 1100 Wayne St > > Suite 1337 > > Troy, OH 45373 > > > > On Tue, Jan 2, 2018 at 2:14 PM, Brian - Winters Broadband via > > Mikrotik-users <[email protected] > > <mailto:[email protected]>> wrote: > > > > If you have insufficient power to power all of the connected devices > > the PowerBox will cycle through powering up the interfaces. The > > solution is to resolve the power issue, but you can stop the Power > > cycling by setting the "PoE Priority". Priority 0 is the highest > > priority. If the PowerBox goes over the available power the port > > with the lowest priority will be turned off first. > > > > Brian Horn > > Winters Broadband LLC > > > > -----Original Message----- > > From: [email protected] > > <mailto:[email protected]> > > [mailto:[email protected] > > <mailto:[email protected]>] On Behalf Of Paul Tackett > > via Mikrotik-users > > Sent: Tuesday, January 02, 2018 10:58 AM > > To: 'Grand Avenue Broadband' <[email protected] > > <mailto:[email protected]>>; 'Mikrotik Users' > > <[email protected] <mailto:[email protected]>> > > Subject: Re: [Mikrotik Users] Powerbox staggering power on ports > > > > Could you replace the batteries to get runtime that would last > > through the night? Without knowing the amp hour value of the array, > > I can't say for certain but I have several 24v solar sites that can > > go 3-4 days without needing attention... > > > > Paul Tackett, COO > > (406)284-3174x105 <tel:%28406%29284-3174x105 <%28406%29284-3174x105> > > > > [email protected] <mailto:[email protected]> > > > > > > > > -----Original Message----- > > From: [email protected] > > <mailto:[email protected]> > > [mailto:[email protected] > > <mailto:[email protected]>] On Behalf Of Grand Avenue > > Broadband via Mikrotik-users > > Sent: Tuesday, January 2, 2018 11:41 > > To: Josh Luthman <[email protected] > > <mailto:[email protected]>>; Mikrotik Users > > <[email protected] <mailto:[email protected]>> > > Subject: Re: [Mikrotik Users] Powerbox staggering power on ports > > > > I guess I don’t understand what you are asking. You say you don’t > > want to write a script, but then you talk about timed power > > shutoffs. What mechanism are you suggesting you would use to do that > > other than a script? > > > > > On Jan 2, 2018, at 8:04 AM, Josh Luthman via Mikrotik-users > > <[email protected] <mailto:[email protected]>> wrote: > > > > > > We have an unfortunate deal where we have a temporary solar > > situation. It's a 24vdc supply to a Powerbox which is POE to a BH > > and AP (Epmp and Nano). > > > > > > Over night of course it loses power these weeks with the lack of > > sun. We get there in the morning and with all three things plugged > > in it won't boot right. It looks like the Powerbox comes up but the > > red light for POE keeps blinking to the BH and AP. We can unplug > > these two, then plug in the BH, and then the AP to solve this > problem. > > > > > > Is there a way to do this without writing a script on RouterOS? > > I'm thinking of shutting power off on bootup, then after 60s port 3 > > on, 60s port 4 on. > > > > > > Josh Luthman > > > Office: 937-552-2340 <tel:937-552-2340> > > > Direct: 937-552-2343 <tel:937-552-2343> > > > 1100 Wayne St > > > Suite 1337 > > > Troy, OH 45373 > > > _______________________________________________ > > > Mikrotik-users mailing list > > > [email protected] <mailto:[email protected]> > > > > > https://linkprotect.cudasvc.com/url?a=http://lists.wispa. > org/mailman/listinfo/mikrotik-users&c=E,1,HBZESswsY5WSA5YaM-OTHgG7r_ > TfmhASlC3g2vERZpQkXMoTDS5VVtXQlh92_1ur6SmG0T7- > p1INxbORI761Hz4CfgggNiBcsa8hulUbh4j3mXlgp7yDLhQbpb6I&typo=1 > > <https://linkprotect.cudasvc.com/url?a=http://lists.wispa. > org/mailman/listinfo/mikrotik-users&c=E,1,HBZESswsY5WSA5YaM-OTHgG7r_ > TfmhASlC3g2vERZpQkXMoTDS5VVtXQlh92_1ur6SmG0T7- > p1INxbORI761Hz4CfgggNiBcsa8hulUbh4j3mXlgp7yDLhQbpb6I&typo=1> > > > > _______________________________________________ > > Mikrotik-users mailing list > > [email protected] <mailto:[email protected]> > > https://linkprotect.cudasvc.com/url?a=http://lists.wispa. > org/mailman/listinfo/mikrotik-users&c=E,1,O3qrB1FFsT1eTiAes6vIBFcWtwQKlJ > iAmOGT8W2VSLfjT5m88499Si3lMttz0SoDw2jLZxshaBzCwaLRiIByGK- > qQ2pIPqkMqFaq1mLPU4FvwNiffETg3Yap&typo=1 > > <https://linkprotect.cudasvc.com/url?a=http://lists.wispa. > org/mailman/listinfo/mikrotik-users&c=E,1,O3qrB1FFsT1eTiAes6vIBFcWtwQKlJ > iAmOGT8W2VSLfjT5m88499Si3lMttz0SoDw2jLZxshaBzCwaLRiIByGK- > qQ2pIPqkMqFaq1mLPU4FvwNiffETg3Yap&typo=1> > > > > > > --- > > This email has been checked for viruses by Avast antivirus software. > > https://www.avast.com/antivirus <https://www.avast.com/antivirus> > > > > _______________________________________________ > > Mikrotik-users mailing list > > [email protected] <mailto:[email protected]> > > http://lists.wispa.org/mailman/listinfo/mikrotik-users > <https://linkprotect.cudasvc.com/url?a=http://lists.wispa.org/mailman/listinfo/mikrotik-users&c=E,1,1rKEpx45wiqABeR9jPiths6e79fcA51wYY_HOmZhrXXGkeYEj9sSz7tnP6ajbIYrjrebbao5QIMIlyT1SrwsixaDOJzAk1Sd25gA0cJNAbXSKTY2KHLDpoU,&typo=1> > > <http://lists.wispa.org/mailman/listinfo/mikrotik-users > <https://linkprotect.cudasvc.com/url?a=http://lists.wispa.org/mailman/listinfo/mikrotik-users&c=E,1,oSfJpk_GjUWYiQLPLFEllpGUJml-mqO1453QZMWio5x7mPq-UmpKqrwitEBfayuYD8dramT-LZQGgrCpmbUXQtRgb0F0cv80hR5vpHV1FFWayHoi&typo=1> > > > > > > _______________________________________________ > > Mikrotik-users mailing list > > [email protected] <mailto:[email protected]> > > http://lists.wispa.org/mailman/listinfo/mikrotik-users > <https://linkprotect.cudasvc.com/url?a=http://lists.wispa.org/mailman/listinfo/mikrotik-users&c=E,1,sxob8WsCD9gHiRV1w4ln8enudqoWYpKpavRePuxQ8qF2VJHdcBPGdm-Fdbwf0be7TVovRamk5Vkkn4MpO334Vub1XJoEAS7M-T08_ZtonQ,,&typo=1> > > > <http://lists.wispa.org/mailman/listinfo/mikrotik-users > <https://linkprotect.cudasvc.com/url?a=http://lists.wispa.org/mailman/listinfo/mikrotik-users&c=E,1,lR7EuB-sB-gXpiUMz2F3mLgQVSxDBYVsYblZtzMprcJU77mt-svSNlL4mfxL5DyCCHrD-ojH0G_y0EIf6QI4hVkw7YQjHyqTiAmR1_pX7w,,&typo=1> > > > > > > > > > > > > _______________________________________________ > > Mikrotik-users mailing list > > [email protected] > > http://lists.wispa.org/mailman/listinfo/mikrotik-users > <https://linkprotect.cudasvc.com/url?a=http://lists.wispa.org/mailman/listinfo/mikrotik-users&c=E,1,82IyD5fgnsLrq8eNR0F_Q218J-gmYAkvkGgdpprdrWC16YXjmMua-2OH4DZYzkrxqnQ5vOvBGDxt9OWFTf9ujxECDTYGjhgNh3iZi4QqJ1QOwg,,&typo=1> > > > _______________________________________________ > Mikrotik-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/mikrotik-users > <https://linkprotect.cudasvc.com/url?a=http://lists.wispa.org/mailman/listinfo/mikrotik-users&c=E,1,HVQxP8eATbknMocQNFmTqqJEB1OsQMp5tM1AKjoW117tQdzYEUPpkJSh7UtEjql5la1OFeGZ663zPC2ccJoU8IEvljXSwAmtGp_lb_OHym2fKCsgtEaFufyKAg4,&typo=1> > > > > _______________________________________________ > Mikrotik-users mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/mikrotik-users > > -- Bois d'Arc Farm Cody Bardwell Crop Operations/IT 334-654-4539
_______________________________________________ Mikrotik-users mailing list [email protected] http://lists.wispa.org/mailman/listinfo/mikrotik-users
