Taken from Randy Cosby on the Part 15 WISP list (including a later
correction):
I read through the FCC filing as well. It's downright confusing. There
are actually two, one for the frequencies you specify, and one just for
3363.2-3363.2. Totally confusing.
Ubiquiti's docs also say they are Part 90Y compliant... Um, that's the
4.9 section :).
So... The good news. To get my feet wet, I tried to register a location
using the Ubiquiti card as the equipment, along with a panel 3.6
antenna. I specified the 3658.2-3668.2 frequencies on the application to
be safe. I got a call back from a rep at the FCC who said basically,
" I know that you probably pulled the frequencies off the ubiquiti
equipment filing, but you should instead put 3650-3675 (the restricted
band). If you will do that, we can get this approved."
So I did.
And it did.
Now, I do have some questions still. Is 3650 ONLY for fixed and mobile,
not PTMP? I know you have to register fixed stations (both sides) and
base stations. But if you're doing a typical AP / multiple CPE setup, is
that considered fixed on both ends, or ??
The card will not work in laptops according to their own filing.
https://fjallfoss.fcc.gov/prod/oet/forms/blobs/retrieve.cgi?attachment_id=921421&native_or_pdf=pdf
----------
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
----- Original Message -----
From: "Mike Hammett" <[EMAIL PROTECTED]>
To: "Mikrotik discussions" <[email protected]>
Sent: Friday, May 23, 2008 6:52 AM
Subject: [Mikrotik] XR3
Does MT yet support the XR3? On another list, I heard that the FCC allows
registration of the XR3. We just need something to put it in.
----------
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://www.butchevans.com/pipermail/mikrotik/attachments/20080523/e93f7a70/attachment.html
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
