Hi, I have been using MikroTik OS for three years now and my system has been working well.
My setup is like this: RB1000 as the core rooter. I use four interfaces; Ether1 = WAN (ISP) with public address /30 Ether2 = Hotspot with private IPs 172.16.2.254/24 for all backhauls and APs static. 10.1.10.254/24 dhcp mainly for PCs and routers. I can also give the static IP to the PCs and Riuters and work fine. NATed these IPs to the WAN IP (ISP). All my clients are connected through this interface some with MAC and others HTTP CHAP. Ether3 = Mail server - Public IPs /29. I am able to access my server remotely. Ether4 = Local network for my Personal use to have permanent internet with private 192.168.101.254/24 This setup has been working very well. Now some of my clients have IP cameras with DVRs that they would like to access remotely. I have been told they need public IPs into their routers. One has to access his Webbox for configuring solar system remotely. I dont know how am going to implement this though I have been given public IP block from my ISP /29. Kindly tell me how this is possible and the setup and what am going to do in the router to effect it. If you need any more info please let me know. Regards Yusuf -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.butchevans.com/pipermail/mikrotik/attachments/20110404/86842452/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
