RB750 does not have a serial port, and it's default configuration has
ether 2-5 configured in switch mode. Ether1 has discovery turned off.
So you need to plug into one of the switch ports. I usually use ether5
on a RB750. Then, when prompted, I choose to _*_not_*_ run the startup
script.
Then use a script of your own to set the thing up.
bp
On 9/21/2011 12:55 PM, Steve Jones wrote:
I cant find this answer anywhere. I have an rb750, im running win7 64 bit
and trying to get netinstall to see this router, ive tried all 5 ports, i
have it checked in netbooting, ive not held the reset, ive held it until act
flashes and ive held it until act flashes then stops. I have my firewall
off, no AV on this machine other than MBAM but its off, the cursor on the pc
flashes when the router boots like it sees something, but never registers,
am I doind something wrong here?
net install is v5.7
-------------- next part --------------
An HTML attachment was scrubbed...
URL:<http://www.butchevans.com/pipermail/mikrotik/attachments/20110921/d5a6eaca/attachment.html>
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://www.butchevans.com/pipermail/mikrotik/attachments/20110921/d2cb861a/attachment.html>
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
