I always used a few diodes. Seemed to work on my solar site. On Sep 27, 2011, at 9:29 AM, Randy Cosby <[email protected]> wrote:
> I had a pleasant surprise this morning. One of our guys swapped out a > RB411AH board on a solar site, but moved it to "unregulated" power. Normally > this will give us 28 or higher volts. I was about to warn him that it would > be problem as the 411AH's were rated to 28V and would shut down if it > surpassed 28. > > Just to be sure of myself I picked up a new 411AH board and looked closely, > and found that is now states "DC In 12-30V" right on the board. I don't have > an old 411AH but do have a couple 411's, and they state 12-28V. Looks like > recent production runs on the 411AH (and maybe other boards) will now handle > up to 30V! Great improvement! > > -- > Randy Cosby | InfoWest, Inc | www.infowest.com > Vice President | 435-674-0165 x 2010 | facebook.com/infowest > > > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://www.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
