If you have ssh on on the bullet, just log into the 750 then
/system ssh 192.168.32.3 user=ubnt
(replace ubnt above with the appropriate username if you changed it in
the bullet)
from the command prompt:
route add default gw 192.168.32.1
Assuming 192.168.32.1 is what the default gateway should be
On 04/19/2012 06:24 PM, Matt Larsen - Lists wrote:
I have a customer radio that we can't get to because the installer
forgot to put in a default gateway.
It is a Ubiquiti bullet5 radio with an IP address of 192.168.32.3.
I have a Mikrotik 750 at the base with an IP of 192.168.32.1 on the
inside interface and 10.17.18.3 on the external interface.
What set of commands would I have to use to set up a dst-nat to send
port 8080 on the 10.17.18.3 interface to port 80 on the 192.168.32.3
interface so I can set the damn gateway?
I'd send someone out to fix it, but the customer is 120 miles away
from our office! At least their Internet is working fine.
Thanks!
Matt Larsen
vistabeam.com
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
