That did it!
You da man Blake!
Matt Larsen
vistabeam.com
On 4/20/2012 1:59 AM, Blake Covarrubias wrote:
On Apr 19, 2012, at 4:24 PM, Matt Larsen - Lists wrote:
What set of commands would I have to use to set up a dst-nat to send port 8080
on the 10.17.18.3 interface to port 80 on the 192.168.32.3 interface so I can
set the damn gateway?
/ip firewall nat
add chain=dstnat action=dst-nat in-interface=external protocol=tcp
dst-address=10.17.18.3 dst-port=8080 to-address=192.168.32.3 to-port=80
add chain=srcnat action=masquerade out-interface=internal protocol=tcp
dst-address=192.168.32.3 dst-port=80
You may need this depending on your firewall policy
/ip firewall filter
add chain=forward action=accept protocol=tcp in-interface=external
dst-address=192.168.32.3 dst-port=80
--
Blake Covarrubias
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
