I would like to set up a router as follows: ether1 - Uplink - 10.35.0.2/29 (default route is to 10.35.0.1)
ether2 & ether3 both assigned to bridge1 bridge1 - UBNT 365 APs - 10.35.3.1/24 ether4 - Canopy 900 AP - 10.35.9.1/24 No problems there. I have a specific network at this site for each band ( 10.35.3.x for 3.65, 10.35.9.x for 900) But, I need ONE dhcp server on this router to hand out publics to these customers. Can I add bridge2, add a dhcp server on that interface, then add ether2-4 to that bridge as well? Or can I even have 2 bridges on the same interface? I know I can make ether3 a slave of ether2 but I like the per port stats. I can give them up if I have to though. Is there another way? -Ty -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.butchevans.com/pipermail/mikrotik/attachments/20120823/c865e2ad/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
