Didn't we just go over this..? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Thu, Aug 23, 2012 at 12:30 PM, Ty Featherling <[email protected]>wrote: > I would like to set up a router as follows: > > ether1 - Uplink - 10.35.0.2/29 (default route is to 10.35.0.1) > > ether2 & ether3 both assigned to bridge1 > bridge1 - UBNT 365 APs - 10.35.3.1/24 > > ether4 - Canopy 900 AP - 10.35.9.1/24 > > No problems there. I have a specific network at this site for each band ( > 10.35.3.x for 3.65, 10.35.9.x for 900) > > But, I need ONE dhcp server on this router to hand out publics to these > customers. Can I add bridge2, add a dhcp server on that interface, then add > ether2-4 to that bridge as well? Or can I even have 2 bridges on the same > interface? > > I know I can make ether3 a slave of ether2 but I like the per port stats. I > can give them up if I have to though. > > Is there another way? > > -Ty > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://www.butchevans.com/pipermail/mikrotik/attachments/20120823/c865e2ad/attachment.html > > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://www.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.butchevans.com/pipermail/mikrotik/attachments/20120823/8cf670e3/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
