On Mon, 2012-10-15 at 18:06 -0500, Scottie Arnett wrote: > I am trying to setup a Routerboard with a Virtual Wireless > AP and a Regular AP on one wireless interface. I have both > AP's working and can connect to them. The Regular AP has a > one public IP on the Wan side and DHCP on it's interface with > NAT and is working. I need the Virtual AP to be bridged so that > the connecting radios use a public IP.
You should be able to do something like this: physical wireless = private IP with NAT and NOT bridged Virtual AP + WAN in a bridge. The IP addresses that are currently assigned to the WAN interface needs to be moved to the new bridge. Also, IF you are specifying out-interface on your NAT rules, the NEW out-interface would be this new bridge. You should add the MAC address of the current WAN port as an administrative mac address on the bridge, so that it doesn't change when people connect/disconnect to the virtual AP. > My problem is that when I enable the the Virtual AP, the regular AP > stops passing traffic to the internet. What have I missed? Or can > this be done this way? Not sure why this is happening, but you didn't post your bridge ports or the firewall nat rules. Perhaps there is a mistake there. -- ******************************************************************** * Butch Evans * Professional Network Consultation * * http://www.butchevans.com/ * Network Engineering * * http://store.wispgear.net/ * Wired or Wireless Networks * * http://blog.butchevans.com/ * ImageStream, Mikrotik and MORE! * * NOTE THE NEW PHONE NUMBER: 702-537-0979 * ******************************************************************** _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
